At The Back Of The Pack
Arm chair racerFirst time rider
Their is several chain brands that sell sets. Comes with chain and front and rear sprockets. Is their a difference between 85 and 86. Lot of places on eBay say 1985 250r and have a different listing for 1986. But some say both years. So is their a difference? Any help would be great
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
First Time Rider
Arm chair racerNew to the board
Both are the same
I'm your dingleberry
The day begins with 3WW
Rear sprockets are NOT the same!
One rides on the inside of the sprocket hub and the other rides on the outside. You have to run whichever sprocket matches to your axle.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
At The Back Of The Pack
Arm chair racerFirst time rider
Okay I was thinking their may be a difference. My r is an 85 but I know people like to change stuff over time. Does the 85 sprockets run on the inside or outside. I want to make sure before I order 85 and mine has been changed to run 86 sprockets.
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
I'm your dingleberry
The day begins with 3WW
'85 runs on the outside, '86-on runs on the inside.Originally Posted by trikeguy2014
FYI: you can swap an '86-on axle into your '85 rear end. All you have to do is run the '86-on rear sprocket. If your sprocket alignment on your machine is good, you know you are running the correct rear sprocket.
Front sprockets are the same.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
Just Too Addicted
Arm chair racerJust too addicted
An 86 sprocket can be used on an 85. My 85 had an 86 sprocket on it when I first got it. You just have to make sure you use bolts with a tapered head on them so they will fit into the tapered holes on the sprocket
Mixing gas and haulin' ass
1984 ATC 70 x2
1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
1985 ATC 250R-stock
I'm your dingleberry
The day begins with 3WW
Hold on a sec.... Which side of the sprocket hub do you mount it too??? I'm thinking with the '85 spec axle, you would have to run it on the outside still due to clearance issues between the sprocket and carrier? And if that's the case, is sprocket alignment on??
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
At The Back Of The Pack
Arm chair racerFirst time rider
Sorry about the mud just got back from a ride yesterday
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
At The Back Of The Pack
Arm chair racerFirst time rider
Other side
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
I'm your dingleberry
The day begins with 3WW
Well what you have is the 86 rear sprocket setup.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
Just Too Addicted
Arm chair racerJust too addicted
With the 86 sprocket on the 85 hub the sprocket was still mounted on the outside and the alignment of the chain was still fine. Now I've got an 86hub and sprocket on there but yes the 86 sprocket is on the inside of the 86hub
Mixing gas and haulin' ass
1984 ATC 70 x2
1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
1985 ATC 250R-stock
At The Back Of The Pack
Arm chair racerFirst time rider
When I order my sprocket set and chain I'll get the 1986 then.
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
Just Too Addicted
Arm chair racerJust too addicted
You'll need different bolts as well also good to put lock nuts on the back side of the bolts just for some extra insurance
Mixing gas and haulin' ass
1984 ATC 70 x2
1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
1985 ATC 250R-stock
I'm your dingleberry
The day begins with 3WW
Thanks Samjp22. Funny, I would think that alignment would be off a bit... But anyhow..
By the looks of his photos, he does have the correct bolts already in the rear sprocket. X2 on new locknuts.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
At The Back Of The Pack
Arm chair racerFirst time rider
I would say the previous owner must have switched it over to a 86 setup. I'll get a 86 chain and sprocket set ordered. And get some lock nuts. Might just use some none permanent locktight and try that first
One of the Haspin Locals
Trikefest 12' 13' 14' 15' 16' 17'
Trikes owned
1985 Honda atc 250r - raced by yours truly #27
1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
1984 Honda atc 200s - raced by Evan Pflum #3
Reply With Quote
