At The Back Of The Pack
Arm chair racerAt the back of the pack
So I screwed up and when attempting to put a new rope on my pull start for my atc 70 the recoil spring came out. This is much easier to do on a 200. Is there a secret to these so I dont end up thworing all the pieces to this thing out into the street?
1986 350x
1985 250es Big Red
1985 200m - sold
1984 225dx - sold
JCPenny Scat Tracker
1977 atc 90
2002 custom Suzuki Volusia
1983 XL250R
1975 XL175 (needs alot of work)
1965 S90
Proud Owner of 1 Set of Trailpros
Just Too Addicted
Arm chair racerJust too addicted
You can't do it bare handed. Best bet is leather gloves an a pair of c clamp vice grips.
Trikefest surviver 2013 and 2014
Putting Priorities in Order, Busier than ever.
Catch me if you can
You can do them bare handed. I did a video putting a spring in a deep dish 110 pull starter. I have the video posted here. Direct link only: https://www.youtube.com/watch?v=JTIwKryf5Qs
I did a Atc70 recoil last year in the trails with only a screw driver on hand. Took less than 15 minutes to be fixed and installed.
Hope it helps.
Reply With Quote