ATC 70 front hub swap

[gladiator mice]

has anyone swapped the atc 70 front hub 3/100 to a 4/110 hub. i got a budget build so spending $100 on a 4 stud front hub from a atc 70 website(s) is not something i want to do. i was thinking maybe a 110 hub would fit the 70 front axle and i could cut it down to the right width to fit the 70 fork. i got a set of 200x rear hubs and plan to run 8x8 rims on the rear and front so i dont have to dig through my pocket lint to buy new douglas 8" rims. having trouble finding 3/100 8" rims for the 70, more options with 4/110. thoughts?

[petesatc]

here you go..... bottom of the page
http://www.hondaatc70.com/Pages/TiresandWheels.aspx

[gladiator mice]

thanks for the response, but this is one of those websites i have checked out already. $100 for a front hub proves my point of not spending that much on a hub for a budget build. atc 110 front hubs are much easier and cheaper to find including the shipping. moding one to an 70 front fork can be doable is what i want to know.

[Toaster556]

Dr ATV sells 8x6 rims in 3/100 for $60 HERE. Only place I've found for a new aluminum rim, but FL250 3 lug fronts should fit on the stock 70 hub, they're an 8x5.5

[Vealmonkey]

You do know the yt125 rims are 1 piece steal with a 3x100 bolt pattern don't you?

[T-Sox]

YT125 rims are too wide aren't they?

Some of the Chinese quads use a 8" 3x100mm steel wheels. I'm not sure if they're centered or offset though.