At The Back Of The Pack
Arm chair racerFirst time rider
So Im working on a buddys 85 350. It trashed the rear axle bearings really bad. Knocked the balls outta the sprocket side bearing and chewed up the carrier some. i got it "workable"
Now I need the find the wear sleeve/ speedi sleeve that the carrier seals ride on.
Done some reading on the net and it seems honda doesnt sell em.
Cant find any diagrams of part numbers either.
So where do I find em?
200x - I think I have 7 of em?
10 70's
3 350x's
Tri Z
225
kxt
and the 90 110 125m that I need to get rid of.
YT175 with rear suspension sold
200es- SOLD !!!!!!
Power User
Got the holeshot
They do not have " Wear sleeves " It is the sprocket hub itself which is damaged. They are pressed onto the axle, to fix the damage you will have to replace the sprocket hub, or have a machinist work his magic.
1985 Honda 250r x2
1986 Honda 250r
1986 Honda 250sx
1985 Honda 250sx x2
1985 Honda 350x x2
1986 Honda 350x
1984 Honda 125m x4
1983 Honda atc 70 w/ Lifan 125
1984 Honda atc 70
Yamaha tri zinger
Yamaha 4 zinger
Brap braaaap
http://www.youtube.com/user/3wheelsoffroad
At The Back Of The Pack
Arm chair racerFirst time rider
Are you sure of that?
200x - I think I have 7 of em?
10 70's
3 350x's
Tri Z
225
kxt
and the 90 110 125m that I need to get rid of.
YT175 with rear suspension sold
200es- SOLD !!!!!!
Just Too Addicted
Arm chair racerJust too addicted
Not sure what that is, if you look at these blow ups of the rear end there is nothing like that on them..
http://www.servicehonda.com/parts/lo...HA5FF14HA5F18B
http://www.servicehonda.com/parts/lo...HA5FF14HA5F13B
Mixing gas and haulin' ass
1984 ATC 70 x2
1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
1985 ATC 250R-stock
Got The Holeshot
Arm chair racerJust too addicted
Is that second piece a part of the bearing that blew up? Like Samjp22 stated, just shouldn't be anything else in there.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
First Time Rider
Arm chair racerNew to the board
That is your brake rotor hub, Honda puts a hard wear sleeve on it, but does not sell it seperate. Just buy a used one and you should be good.
I'm not bipolar I'm tripolar!
At The Back Of The Pack
Arm chair racerFirst time rider
It technically has one on each side. I cut it off thinking it was a regular replacement piece. It was pretty screwed up on both sides.
Im gonna go to napa and a few other places it looks like and see if I can get a thick heavy wear sleeve.
200x - I think I have 7 of em?
10 70's
3 350x's
Tri Z
225
kxt
and the 90 110 125m that I need to get rid of.
YT175 with rear suspension sold
200es- SOLD !!!!!!
Just Too Addicted
Arm chair racerJust too addicted
Oh I know what those are, like hurricane said, that's supposed to stay attached to the brake hub and sprocket hub and those ride just inside the bearing carrier, I wouldnt fart around trying to get something similar that'll fit because that's suppose to rotate with the axle
Mixing gas and haulin' ass
1984 ATC 70 x2
1985 ATC 250R-Ported/Polished, PWK 39mm, V-force 3's, Outerwears air box lid, FMF fatty with DG silencer, DWT wheels, LSR +4 axle, all black plastics
1985 ATC 250R-stock
At The Back Of The Pack
Arm chair racerFirst time rider
I thought that that was the idea of a wear sleeve....
200x - I think I have 7 of em?
10 70's
3 350x's
Tri Z
225
kxt
and the 90 110 125m that I need to get rid of.
YT175 with rear suspension sold
200es- SOLD !!!!!!
Reply With Quote
