Results 1 to 4 of 4

Thread: 23.5x8x11 on a 250sx?

  1. 01-16-2004, 09:14 PM #1
    chaser
    chaser is offline New to the board Arm chair racerNew to the board
    Join Date
    Sep 2003
    --
    12

    23.5x8x11 on a 250sx?

    Has anyone put an 11" wheel with a 23.5x8x11 tire on the front of their 250sx? I put some 22x11x9's on the back of my 86 recently, and it sits very high in the back now. The front currently is a 22x11x8 tire. I would like to improve the looks by adding a taller tire on the larger wheel. Also, what is the backspacing if any, on the front wheel?
    Thanks!
    Reply With Quote Reply With Quote
  2. 01-17-2004, 11:09 AM #2
    Dirtcrasher's Avatar
    Dirtcrasher
    Dirtcrasher is offline Power User Catch me if you can
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,460

    Re: 23.5x8x11 on a 250sx?

    Quote Originally Posted by chaser
    Has anyone put an 11" wheel with a 23.5x8x11 tire on the front of their 250sx? I put some 22x11x9's on the back of my 86 recently, and it sits very high in the back now. The front currently is a 22x11x8 tire. I would like to improve the looks by adding a taller tire on the larger wheel. Also, what is the backspacing if any, on the front wheel?
    Thanks!
    You can mount whatever you wish on there with 4/110 mounting. You will have to adjust the axle spacers or make some wheel to hub spacers in order to center it correctly.

    Or toss on a whole 200X front end which will raise it 1" and run the 200X front rim/tire setup - or the 250R setup. Again you may need spacers to center it correctly. But you can also have the front disk brake if you'd like.
    Reply With Quote Reply With Quote
  3. 01-19-2004, 01:49 AM #3
    mad_max
    mad_max is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Nov 2003
    Location
    Kansas
    --
    462
    Chaser, check your PM's
    Reply With Quote Reply With Quote
  4. 02-03-2004, 02:38 PM #4
    bbechtel16
    bbechtel16 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2002
    Location
    Halifax, PA
    --
    400
    Or a 350X front end! :-D
    -'86 ATC 250SX: No longer mine... Complete 350X front end, Corbra Megaphone system, 350X carb with UNI dual stage foam & outerwear bolted driectly up, Powroll/Rocky 260cc bore 10.5 to 1 compression piston.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //