At The Back Of The Pack
Arm chair racerAt the back of the pack
I've just about resigned myself to the fact that I will likely have to go the route of an aftermarket grab bar on my 85R...especially after seeing one go for $290 on eBay a couple of days ago
My only other option would be to get one for another year. Does anyone know if a grab bar from a 1st or 2nd gen R would even bolt up to a 3rd gen frame?
Thanks.
First Time Rider
Arm chair racerNew to the board
PRM sells great aftermarket ones for 70-80$ on ebay they also have some with six pack racks.
Power User
Got the holeshot
PRM makes some cool stuff, I can't believe they are still around we used there stuff in 1984-1985ish.
Most cool ATC companies are long gone.
I would ditch you six pack rack, unless you are bad at wheelies.
Email- onformula1@hotmail.com Rebuilt, Revalved, custom springs, lowering, forks & shocks, Custom Suspension, all brands, 2-3-4 wheeler's- PM or Email with questions.
***Check out my album for cool pictures*** http://www.3wheelerworld.com/album.php?albumid=2527
As always- Everything I post is IMHO.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Yeah, I will either go with a DG or a PRM if I can't find a stocker to finish the bike off with. My goal when I got it a few months ago was to make it a "complete" rider. Not necessarily restored...just a complete original bike.
I have found everything that it needed except for an OEM grab bar...and I'm not going to spend $300 for one. So...was just wondering if one for another year would fit the frame. If not, then I will likely get the DG in textured black which is about as close to OEM in terms of looks that I have found.
Reply With Quote