Just Too Addicted
Arm chair racerJust too addicted
A few people have asked about this, and now I have pictures
Heres the details of the narrow front wheel setup on my 250SX...
The wheel is 4/110 bolt pattern with no offset. It runs a 23.5x8x11 tire, I have no information on the wheel but I'm guessing its a Douglas blue label.
The wheel mounts to 3 aluminum spacers. The spacers are 6 inch OD, 3 7/16 inch ID, and are 3/16 inch thick.
The studs are 1 3/4 inch long, I believe stock is 27/32 inch long.
The front end is totally stock except as noted.
Registered User
New to the board
id like to put a skinnier tire on my sx cant i just swap out the tripple tree from a 200x or 250r???? if not where can one get those spacers????
At The Back Of The Pack
Arm chair racerAt the back of the pack
yes you can.
1985 ATC 250SX
1982 TRI-MOTO175
1986 ATC 200s
At The Back Of The Pack
Arm chair racerAt the back of the pack
SX with 200x front end.done by maddmaxx. and now MINE AALLL MINE!!!!
1985 ATC 250SX
1982 TRI-MOTO175
1986 ATC 200s
Reply With Quote