I procastinated the next step the whole project but one day it needed to be started... the seat:
First Time Rider
Arm chair racerNew to the board
I procastinated the next step the whole project but one day it needed to be started... the seat:
First Time Rider
Arm chair racerNew to the board
I had no aluminum tube with that large diameter to built the intake adapter for my carb so i rolled one:
First Time Rider
Arm chair racerNew to the board
I won some hubs on ebay:
during my first test ride i burned my leg... thats somthing only carbon can fix:
New to the board
Arm chair racerNew to the board
WOW!!! Simply amazing, now put some in production and I will buy one!!!
First Time Rider
Arm chair racerNew to the board
Just in case, how much would you pay?Originally Posted by strykerlover
New to the board
Arm chair racerNew to the board
I'd pay $6000 but that's because I'm poor! LOL! If I had money I'd probably spend up to $8000 for that!!! I know it's worth more than that!
First Time Rider
Arm chair racerNew to the board
Hi everyone,
sorry for letting you wait...
Some pics from the last days of manifacturing:
Time to give the seat some fur...
That is some kind of rubber foam that straightens the surface and fills up some holes from the grinding of the base material.
First Time Rider
Arm chair racerNew to the board
Preparation of the aluminum sheets which hold the leather:
Time to put on the leather:
It is partly riveted and the positions where it was not possible i glued it with kövulfix, a strange contact glue that is normaly used to glue shoes. You have to apply it, let it dry for 10 minutes and then you have to push everything together, the stronger you push the stronger it glues togehter.
Till now it works great.
First Time Rider
Arm chair racerNew to the board
Last remaining parts were painted red:
The kickstarter is held by a HDD magnet:
First Time Rider
Arm chair racerNew to the board
Almost done, time for a new project:
Cause engine came from a CR it is kicked backwards and i needed to cut the fender. That puzzeld me for a week to find a solution that is not to ugly:
First Time Rider
Arm chair racerNew to the board
everything was stiched together with cable ties:
Result after the first debug run:
One of the brake bolts vibrated itself loose and the brakedisc cutted trough the bolts of the caliper, that was fixed and some loctite should now do the job...
First Time Rider
Arm chair racerNew to the board
some footage of the finished trike:
Everything works now great, it hawls asses and has an unusal power at low rpm but also a strong powerband when you speed it up.
The only disadvantage is the unusual position of the right leg because of the large pipe, but this is a point that i can accept
It now needs a bigger chainwheel to use the last two gears too...
Next i will write report of my Kawasaki Mocate built if you are interested ?!
Last edited by sticker_sääp; 11-13-2015 at 05:16 PM.
Power User
The day begins with 3WW
Great build!!
Yes, I would like to hear about the Mocate build too.
Sent from my Z998 using Tapatalk
New to the board
Arm chair racerNew to the board
Sticker_saap, what size, and kind are those tires on your three wheeler.
Power User
Got the holeshot
Mocate, please
Sent from my SM-G386T1 using Tapatalk
Email- onformula1@hotmail.com Rebuilt, Revalved, custom springs, lowering, forks & shocks, Custom Suspension, all brands, 2-3-4 wheeler's- PM or Email with questions.
***Check out my album for cool pictures*** http://www.3wheelerworld.com/album.php?albumid=2527
As always- Everything I post is IMHO.
Reply With Quote