Results 1 to 6 of 6

Thread: Shifting

  1. #1
    Join Date
    Jan 2015
    Location
    Rock Valley Iowa
    --
    35

    Shifting

    Hello Again. First thanks, this site has helped me with a lot of stuff. But now i am stumped again. Well now that I finally got my three wheeler running, now I have noticed that when I am driving It will be in a gear and sometimes go in between them, so its like it is in neutral but it will do it when I am in 3rd, 2nd or any gear. Is there a way to adjust that?

  2. #2
    Join Date
    Feb 2010
    Location
    Blossvale NY
    --
    4,563
    Does it act like it goes into neutral and only occur when you let off the throttle?? In other words, you let off the throttle with the intent to engine brake a little bit and it just coasts as if it were in neutral...

    Also, make and model of your trike would be helpful.
    Trikes:
    '85 ATC 350R
    '85 ATC 250R
    '86 ATC 350X
    '85 ATC 350X
    '84 ATC 200ES Big Red
    '84 ATC 125M
    '85 ATC 110
    '85 ATC 70/110

    If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r

  3. #3
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,811
    Sounds like a shift drum stopper issue.
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  4. #4
    Join Date
    Jan 2015
    Location
    Rock Valley Iowa
    --
    35
    Quote Originally Posted by RIDE-RED 250r View Post
    Does it act like it goes into neutral and only occur when you let off the throttle?? In other words, you let off the throttle with the intent to engine brake a little bit and it just coasts as if it were in neutral...

    Also, make and model of your trike would be helpful.
    Yes you are correct. And its a 1984 ATC110

  5. #5
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,811
    Part number 9 is either broken / bent or the spring has failed , very common issue .
    http://www.partzilla.com/parts/searc...RUM/parts.html

    its located behind the clutch cover .
    Last edited by shortline10; 10-19-2015 at 05:34 AM. Reason: Spelling
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  6. #6
    Join Date
    Jan 2015
    Location
    Rock Valley Iowa
    --
    35
    IS that hard to replace?

//ArrowChat Integreation Code //