350x exhaust build

[freewheeler]

Better watch it, you are dealing with a respected member for 7 years and 1,346 posts.

Be nice we are here to help each other, not start problems which you seem to like from reading your other posts.

Huh? Just asking some valid questions. You seem to be answering my posts in other people's threads even before they do. You must be the local guru?

[userj8670]

They will definitely come out fairly easily if you do exactly what I suggested . . Also, once you cut them with the chisel, you can use a thin blade screwdriver to pry them out instead of trying to hook them from behind . . You could actually just make 1 cut then try to pry it up and if that doesn't work you can make 1 more and so on . . The metal is fairly soft and pliable so it will bend fairly easily once it is cut which will make them come out easier . . If you get an end bent up far enough you can grab it with some good vice grips and pull it out.

I'll try that this weekend and let you know how it goes. Thanks!