Ok guys any idea if a 1985 KX250 crank will fit in my 86 T3? Any idea what I should do? The rod doesnt move up and down, only side to side: around a 1/16 total. Will it hurt it if I run it this way or is it a must to get it fixed? Thanks.
Just Too Addicted
Arm chair racerJust too addicted
Ok guys any idea if a 1985 KX250 crank will fit in my 86 T3? Any idea what I should do? The rod doesnt move up and down, only side to side: around a 1/16 total. Will it hurt it if I run it this way or is it a must to get it fixed? Thanks.
3WheelsForever / Virgil
TrikeFest 03, 04, 05, 06, 07
1985 Honda ATC350X - TF2015 Project
YZ426 Hybrid Trike - On the back burner
First Time Rider
Arm chair racerNew to the board
Side to side is fine.... Up and down is what you worry about....If you want to rebuild your crank, I've got a brand new pro-x rod kit I'll sell for 50.....
2004 Kdx200
2005 sv650s
Just Too Addicted
Arm chair racerJust too addicted
Well thanks Sean. I may have to think about that. Let me get it running, I may buy that if you still have it eventually just for a spare.
3WheelsForever / Virgil
TrikeFest 03, 04, 05, 06, 07
1985 Honda ATC350X - TF2015 Project
YZ426 Hybrid Trike - On the back burner
At The Back Of The Pack
Arm chair racerAt the back of the pack
kawasaki used the same cranks for ever, like 83-96 or something, go on a website that lists weisco cranks, that will give you the years, and yes the 85 kx or kxt will work fine
First Time Rider
Arm chair racerNew to the board
Nick may be right, but i looked up different rods for my '86, and found out, on the '86-'87 t3 works, and '85 KX250(thats all i could find anways) but i do know sean was right, side to side is perfectly normal.Originally Posted by NICKG
Reply With Quote