Just put on a new DG exhaust on my 1982 200x but not sure what gasket for front port hole.
First Time Rider
Arm chair racerNew to the board
Just put on a new DG exhaust on my 1982 200x but not sure what gasket for front port hole.
First Time Rider
Arm chair racerNew to the board
Sorry meant 1984
yaegerb
The day begins with 3WW
Don't understand your question.
At The Back Of The Pack
Arm chair racerAt the back of the pack
If your talking about the exhaust to head gasket, the one i have is a copper crush ring. Like an o-ring just copper, and it crushes when you tighten it on. It came in a top end gasket kit i bought, but im sure you can find it by itself for a few bucks. I have the same exhaust on mine
At The Back Of The Pack
Arm chair racerAt the back of the pack
Looks like this
Got The Holeshot
Arm chair racerJust too addicted
Your original gasket may very well be stuck inside the head still. Take a look, as long as it's there and not crushed paper thin, it's generally reusable.
1985 Tri-Z 250
1985 ATC250R
First Time Rider
Arm chair racerNew to the board
Thank you!
At The Back Of The Pack
Arm chair racerAt the back of the pack
If you need a gasket I can ship one to you for $4.00 and additional ones in that shipment for $2.00 each. They fit a lot of Honda models, I will post an ad soon in the classifieds that lists all the different models.
Reply With Quote