1984 Honda ATC 200s help!!!

[Tkoenning]

I went out on a mud trip yesterday with my buddies and I kept throwing my chain so I'm pretty sure its stretched. As we were leaving I was rolling in second gear and my machine died on me. So I got off to pull start it and it would not start at all. After a few tries I couldn't feel compression at all it was just free rolling and then the pull start locked. I took it home cleaned it up and pulled the pull start off and the engine wouldn't rotate forward until I rotated it backwards . then it rotated fine. So I put the pull start back on and the compression felt good but it wouldn't star . Then it got easy again and locked to where the pull start won't move. Idk what could cause this.any help is appreciated.

[pinkhippo1]

Dose it have the decompression system?

[350for350]

Is there something wrong with the cam chain tensioner?

[Jonathan Rusu]

Sounds like valve problems... Be careful forcing it to turn


Sent from my iPhone using Tapatalk

[Tkoenning]

I know the cam chain needs to be adjusted

[edizzle89]

its weird that it would happen on a roll as that shouldnt cause any kind of valvetrain problems but what your describing sounds like it