Help with wide crown, long staples, pneumatic stapler....

[Dirtcrasher]

Hey guys, I'm fixing my Toy Hauler. They used staples EVERYWHERE....

I got the floor done, but I'm onto the roof and walls now (I got it dirt cheap but man was the past owner an idiot); Just a little COCK here or there and he would have been just fine. All kidding aside:

The staples are about a 1/2" crown or top width. They are from 3/4"s to 2"s long and I cannot find anything. They are not a T-50 that Lowes just tried to sell me. I am stuck with this fastner method in some places. All Lowes had was a floor stapler with a .5625 or .6250 wide crown for flooring. I'll need various length staples as well.

I need this tool 1X, and a few different lengths of wide crown staples. Dad suggested a "rug stapler", but that did not help in my search.

Ebay, Amazon and a Google search were not much help. so, if you know more than I found, please share it with me. I don't need a 200$ gun for 1 job but if that's what it takes, then so be it.

I have 6 weeks to get this done. Weather and other problems will get in the way. However, all the freedom I have is incredible......

Just please chime in if you know where to get one, thanks very much!! Any link or help is greatly appreciated!!

Steve
DC

[Jd110]

Have you tried the rental stores near you? Or harbor freight is Cheap. I have a finish nailer/stapler that uses 1/4 crown. What you need is the kind framers use-it's bigger. They aren't cheap at the local power tool store or building supply. Have fun with your project!The Hitachi N5010A standard crown stapler fires 1/2" crown, 16-gauge crown staples, 3/4" to 2" in length. Features Hitachi's next generation "Industrial Design".

[averysdad]

http://m.harborfreight.com/air-tools...ler-68057.html says it shots 1 1/2" long but I don't know how wide the crown is

[atc007]

All I can tell you is,,, they are used EVERYWHERE in mobile homes/trailers. The factories eat them right up. A mobile home dealer with have what you need, but a brad nailer will probably do about the same job,depending on what you're holding together.

[Dirtcrasher]

Thanks everyone.....

I'll get some pics up, it's a horror show right now.

[83ATC185]

Trust me I feel your pain these are staples pulled during our trailer remodel. And we're not done yet.I've run into a bunch of the staples you described, I've never seen any more like them either.

[jeswinehart]

Who made the trailer DC ?
I live in the heart of the trailer industry,,,
I would imagine Seco would the manufacture of those staples.

[hoosierlogger]

Are you doing a concourse restoration here? Why does it need to be exactly the same? You will probably wreck it on the way to trikefest any way.����

[jeswinehart]

http://www.senco.com/fasteners/

I had spelling incorrect.

[hoosierlogger]

Wtf, my smilies have changed to question marks.

[just ben]

200 for the gun and 50.00 for each size staple. I have one if you wanna come get it lol

[ironchop]

That's a framing stapler.

Here's one...

http://www.amazon.com/Paslode-501230.../dp/B000FFX05C

Sent from my Z958 using Tapatalk