Registered User
New to the board
Hey guys I've got a 1984 ATC20023es that won't start. The starter turns over, I'm getting fuel, good coil ohms, but no spark. I've tried 4 plugs to see if it was possibly a bad plug but I keep getting the same results. Someone told me it could be the stator. Is it a possibility that could be my problem? What other things could i look for? Thank you in advance!
Power User
The day begins with 3WW
Most likely the CDI , it's still available new from Honda .
Last edited by shortline10; 05-19-2016 at 09:29 AM.
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Power User
Got the holeshot
Maybe the CDI. Common problem with the 84.
1980 ATC 70 Needs Restoration
1985 ATC 250es Fully Refurbed
1986 ATC 350x Mint Original
New to the board
Arm chair racerNew to the board
also check the wiring to your kill switch, if there is a broken wire it will keep it from sparking
"If you're gonna be dumb, you gotta be tough"
** 1986 Honda ATC 250SX - '86 250R forks - LED headlight - 250r gold wheels **
Registered User
New to the board
How do I go about checking the CDI for fault?Originally Posted by atcmatt
Sent from my LG-H901 using Tapatalk
Reply With Quote