Roostin' Away
Arm chair racerRoostin Away
Well. I got this 200X weeks ago. It needed some things. Got all the mechanical things done. Rear carrier bearings, brakes, New chain and sprockets.
Fresh gas, oil change, new plug and air filter. Time to run it up. Fired up first kick. Ran good for 15 minuites then just died on the trail... Boom. No spark.
I did a bit of a search. Looking for wiring diagrams and test procedures. Sorry if I missed the boat on where they are on the forum. Maybe I can't access them as I am noobie(?)
yaegerb
The day begins with 3WW
Bust out the manual and meter and start ohming....could be a number of things. Likely culprit is stator.
At The Back Of The Pack
Arm chair racerFirst time rider
I agree with Yaeger.Originally Posted by Rob Canadian
Mine would have weak spark and die, then it wouldn't start, then all of a sudden start. Bad ignition coil.
It would be a good idea to check for nicks in the wiring harness, bad connectors, etc.
Let us know how your tests go bud.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
Roostin' Away
Arm chair racerRoostin Away
Downloaded the Owners manual and the Repair manual tonight.
I did go out to have a boo at it. I have spark now. I did find a broken wire. Yellow. Left hand side. Comes off the "Alternator". And yes I have no lights. hehe.
Going to take it into work. Test a couple things. Was hoping to have "no" spark tonight as it is hard to test stuff when it works.
Wanted to pop the CDI cover off. Screws will not come out. No biggie. Take it into work.
Last edited by Rob Canadian; 06-21-2016 at 07:45 PM.
Reply With Quote