New to the board
Arm chair racerNew to the board
I took these things apart way to long ago and don't remember the direction they go back on. :P
They have a small sleeve on them, are those designed to crush against the washer facing inside? I assumed the washer fit over top of the sleeve but they don't.
...Tools ...Toys (same thing)
Roostin' Away
Arm chair racerRoostin Away
Does this help?
New to the board
Arm chair racerNew to the board
Thanks Rob but it's difficult to tell for sure from the diagram (that was the first place I looked, it's #16) - I was hoping someone remembered from when they took theirs off.
...Tools ...Toys (same thing)
New to the board
Arm chair racerNew to the board
The shop manual doesn't specify direction either, which is odd considering this is a specialized one way bolt!
...Tools ...Toys (same thing)
Power User
Roostin Away
That's not a crush sleeve. That extended sleeve portion should be away from the washer that you tighten up against. The point of that sleeve is that you will use a punch and dimple that sleeve over a hole in the shaft to form a locking mechanism.
- Frank
1984 200ES Big Red
1985 350X (x2)
1986 350X
1986 250SX
1984 Auto-X
1984 ATC70
1985 ATC70
Power User
Roostin Away
I did a quick google search just to show you the idea of staking that locknut. Here is a guy's webpage where he shows the locknut staked (dimpled down into the groove of the shaft).
http://www.mytriplogs.com/share_trip..._log_node=blog
It's the 4th picture down from the top.
- Frank
1984 200ES Big Red
1985 350X (x2)
1986 350X
1986 250SX
1984 Auto-X
1984 ATC70
1985 ATC70
New to the board
Arm chair racerNew to the board
That makes perfect sense! Thank you very much
...Tools ...Toys (same thing)
Reply With Quote