abandonded 200x rescue engine rebuild questions

[axeman24]

hello 3ww I am an new member but a long time reader

I am currently rebuilding my original 85 200x motor from my running auto x (this bike was left out for years and even flooded in hurricane sandy)

ive been working on it for months to get the piston out (top end was seized tight)

I finally got the piston to move but on the last hit I cracked the bottom of the sleeve my local shop wants 300 to re-sleeve only (I have been told it cant even be done that the jug is cast around the sleeve)

my question is for a replacement jug I have read that the any Honda 200 top ends are interchangeable but cannot find definitive answer for the jug

I can get a oem used 200 jug on ebay for $50 or a reproduction kit for 75 (has anyone used this kit thoughts? http://www.ebay.com/itm/Cylinder-Pis...JXhrqd&vxp=mtr

my question is is this actually compatable as I have also read that the stroke is different on different models that it will fit but may have low compresson or hit the head
any thoughts on the aftermarket jug/heads on ebay anyone ever use them

thanks again and I hope to contribute and get help from this forum

also I am looking to buy a liquid cooled r not sure where to post that so I figured id add here are there classifieds on this site

let me know if I posted too much different things again new to forum

[oldskool83]

atc200x 200s 185s xr200 topends all the same. do not buy aftermarket crap, buy oem there are tons out there being parted and nearly stock bore. napa autoparts store bore them also for next piston size.

[oldskool83]

buy this:

http://www.ebay.com/itm/1984-1985-Ho...hXkp-e&vxp=mtr

[axeman24]

I apologize for the double post I contacted an administrator to help the problem posting

a member contacted me with a box of x parts they are in the mail
I am very happy I joined the board