New to the board
Arm chair racerNew to the board
I'm running a 83 250r with a hondaline 300kit never bored .with a hand made bills pipe ,K&N air filter and a 38.9mm pj kiehnn carb .. it's not put together yet. Just trying to get an idea on what others have ran for pilot and main jets from similar build. Thanks.
At The Back Of The Pack
Arm chair racerAt the back of the pack
That thing sounds really cool!
Do you have some form of a jet kit, or are you going to buy separate jets?
What type of needle do you have?
My 86 250R is bored to 66.50 (barely over stock) and has all the stuff done to it.
I use a #52 pilot/#180 main and a DEJ needle 4th clip down.
The same motor with a light port job, nothing done to the head and pump gas used #50 pilot/#175 main and the same DEJ needle 4th clip down.
This may not be that much help but.... Its something.
1984 Honda Big Red ATC 200ES (Emma)
1985 Honda 200X ATC (Pretty Boy)
1985 Honda 250R ATC (Dr. Fast)
1985 Honda 250R ATC ( 77 )
1985 Honda 250R ATC (Baller)
1986 Honda 350X ATC (Go Go Girl)
Feed Back: http://www.3wheelerworld.com/showthr...k-for-arlaunch
New to the board
Arm chair racerNew to the board
It is a stock flat slide carb from a 86 cr250r .. Main jet is 172....pilot is a 60.. needle says R1368N I'll look it up .. called bdt motor sports but I said 1983 and they kept trying to hang up hahaha...i would like to buy individuals because it would be cheaper than buying a custom jetting kit. Starting to look like my best option though
Last edited by scora7; 09-17-2016 at 06:32 PM.
Reply With Quote