//ArrowChat Code
Results 1 to 2 of 2

Thread: 200x piston identification help.

  1. 10-08-2016, 03:14 AM #1
    fort9erfan
    fort9erfan is offline New to the board Arm chair racerNew to the board
    Join Date
    Jan 2016
    Location
    peoria, az
    --
    19

    200x piston identification help.

    Hey all, Im rebuilding a 200x I picked up few weeks ago. The previous owner said it smoked when he got it in a trade so he parked it and never really rode it. When i pulled apart the top end the cylinder looked really clean, possibly recently honed. The gaskets looked fairly new only issue was piston looked lil rough on the skirt but looked to have new rings. Only markings on the piston i could find were "PROX 011268" I've been trying to find some info on this piston to see if the cylinder has been bored over or anything as I dont have the correct measuring tool to tell but can't find anything.

    If someone has any info on this item or a good source to find out it would be appreciated. The pro x site didnt tell me anything.

    Thanks in advance.
    Current Trikes:
    81' Honda 185s
    85' Honda 200x
    85' Honda 250sx
    Reply With Quote Reply With Quote
  2. 10-08-2016, 05:28 PM #2
    John Tice's Avatar
    John Tice
    John Tice is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Aug 2015
    Location
    Portland Oregon
    --
    174

    Question

    Prox pistons & accessories is part of the PMI group. PMI = Performance Motorsports International. The PMI group owns JE Pistons, Wiesco Pistons & the ProX product line. Any cycle dealer should have a ProX catalog in their catalog rack.

    John Tice
    503-593-2908 Alternate 541-508-3944
    www.smallenginemachineworks.com & www.nwsleeve.com
    Turning Custom Cylinder Sleeves Since 1971
    http://forums.everything2stroke.com/...d-the-Shop.com
    Last edited by John Tice; 10-08-2016 at 05:43 PM.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //