Inland ATV

[hondaatcvabeach]

Any of you guys rec. dealing with inland? I have seen bad feedback about them but they are the only ones who seem to have the parts I need. Anyone know were I can get some good used parts for a 200s motor?

[sportvette]

his name is "Honda" on 3wheelerworld
website: http://recreationplanet.tripod.com
email: tanya04924@hotmail.com

dont get ripped off and treated like dirt from Inland!

-mark

[ScottZJ]

Let me shed some light on this subject. Read this and make your own judgement. But you can check ebay for stuff and post around here. I have seen alot of parts going around for those..........peace

http://www.3wheelerworldforums.com/viewtopic.php?t=18225

[ScottZJ]

Well John you are 100% correct about getting what you paid for fast. The problem arises when something is wrong, then they have issues. I bought 2 headlight guards one for my 350x and one for the SX. The X fit great and looks great the SX one is totally wrong and would never ever fit a trike(mainly cuz it bolts on in the middle and not on the side with the forks. Since there is nothing to bolt something in the middle of an SX I aboviously got the wrong item.
After constant calls and emails I never once got someone that could assist me. So I have this headlight guard that I dont know what to do with and out 50$. Other than that, no problems here lol.

[84250r]

These are the same people that want $10 to ship a SINGLE gas cap,wtf!

[Grant2k]

i have dealt with Rec Planet and i don't know if you would want to. i don't think i will again. I bought a gas tank for my 200s and they said their tanks were rust and dent free. i also paid $10 for red paint. I sent them the money and got and email over a week later that they were just prepping it for paint. when i finally got the tank and saw the paintjob, it was one of the worst i've seen. then when i put gas in it, it had 2 leaks, but they were tiny and easily repairable with some JB Weld. and they didn't mask the opening when they painted it so the inside had as much paint as the outside, and i had to rinse the tank a thousand times before i could actually use it.

[deathman53]

I used to deal with inland atv, last time I called I got treated very rudely. I heard that mike no longer works there. I mostly delt with him, very good remarks about him. I needed a axle for my 86 200x, he found me a new +4 durablue. I was suprised. I ordered of tecate stuff got lost in the mail, they send me replacements when they got them in. The last time I called I asked about a head for my 86 x and the guy told me $400, I asked why, he said "if you need it its worth it" I replyed "how much you want for a whole running motor, the guy said some ridiculas price like $800. then I asked about fork guards, the guy said "good trailprotrailprotrailprotrailprotrailprotrailprotrailpro luck, we ain't got any"

[hondaatcvabeach]

looking for 200s parts, pullstart-case the pullstart bolts to-shifter-carb and intake

[freaksfix]

Well John you are 100% correct about getting what you paid for fast. The problem arises when something is wrong, then they have issues. I bought 2 headlight guards one for my 350x and one for the SX. The X fit great and looks great the SX one is totally wrong and would never ever fit a trike(mainly cuz it bolts on in the middle and not on the side with the forks. Since there is nothing to bolt something in the middle of an SX I aboviously got the wrong item.
After constant calls and emails I never once got someone that could assist me. So I have this headlight guard that I dont know what to do with and out 50$. Other than that, no problems here lol.

hey I put a SX light gaurd on my brothers SX that I had got from inland, and it dont mount on the outside of the clamps in mounts in a few inches. there are two holes drilled in the top clamp and two in the bottom clamp, for the guard, and it just bolts on...