Results 1 to 4 of 4

Thread: '84 atc70 no spark

  1. #1
    Join Date
    Feb 2017
    Location
    Vancouver BC Canada
    --
    9

    '84 atc70 no spark

    '84 ATC70 with most of the wires cut.

    Trike had an intermitent issue...would start on first or second pull. When it was shut off, it wouldn't restart, even if it was off for only a minute. Replaced stator coils, points, condenser and ignition coil...now I've got nothing, no spark at all. The only thing not hooked up is the neutral switch. I can't figure out what it hooks up to...schematics are no help. Ground seems fine.

    Thanks

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,811
    Don't worry about the neutral switch , it's not needed . Did you buy an aftermarket coil ? If yes their crap .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Feb 2017
    Location
    Vancouver BC Canada
    --
    9
    coil and stator from Spangler.

  4. #4
    Join Date
    Feb 2017
    Location
    Vancouver BC Canada
    --
    9
    Turns out...bad solder on bondenser. I'm a silly bunt.

//ArrowChat Integreation Code //