//ArrowChat Code
Results 1 to 11 of 11

Thread: My first three wheeler.

  1. #1
    Join Date
    Apr 2017
    Location
    US
    --
    5

    My first three wheeler.

    1981 ATC 70 I got for 100 dollars. Struggles to run, has a rusted tank, but the plastics are in awesome shape. Frame and forks are straight, the tires hold air, but it has a very weak spark.

    I will be cleaning it up and working on it tomorrow to try to get it running. If anyone has any tips on what to look for, I would greatly appreciate them.

    Sent from my XT1585 using Tapatalk

  2. #2
    Join Date
    Jul 2016
    Location
    Pennsylvania USA
    --
    65
    Always start the the carb. Take the bowl off and see how it looks. In my experience depending how clean it is gives a good outlook on how easy it will be to get running. I don't know if those have point or a coil.... either way I would say take a look at the stator if it has weak spark


    ~Matt Gusciora

  3. #3
    Join Date
    May 2017
    Location
    US
    --
    42
    Nice buy!

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  4. #4
    Join Date
    Jul 2016
    Location
    Pennsylvania USA
    --
    65
    And obviously DO NOT run in the tank till the rust is fixed


    ~Matt Gusciora

  5. #5
    Join Date
    Feb 2017
    Location
    WA
    --
    2
    Time to pull out the trusty points file and adjust some points.

    Sent from my SCH-I545 using Tapatalk

  6. #6
    Join Date
    Apr 2017
    Location
    US
    --
    5
    Turns out that the guy I bought it from doesn't know how to test if a plug is firing, plenty of spark, definitely enough to get my attention​.

    I pulled off the tank and it is rough, the inside is very rusted but the hole on the side is fixable, I plan on getting some epoxy and tank liner, and see what I can do to patch it.

    The bike will run, but only if I manually choke it, I made my own gasket to go on the bottom of the intake manifold so it is possible that there is a leak. The valves are set about right and the carb is clean. Any ideas on what to check?




    Sent from my XT1585 using Tapatalk

  7. #7
    Join Date
    Apr 2017
    Location
    US
    --
    5
    She's alive! With the help of some break clean and my beer bottle gas tank, I was able to take my first ride. It won't run without the choke being on, but it's a start. It smoked a lot at first, but quit after about 5 minutes of riding.

    Found that I had a leak where the carb mounts to the manafold, electrical tape will have to work for now.

    So glad to hear the engine run.

    Sent from my XT1585 using Tapatalk

  8. #8
    Join Date
    Apr 2017
    Location
    South of France
    --
    38
    Nice buy ! It looks in good condition but there is a lot of work to make it shine. good luck !
    1986 Honda ATC 125M
    1986 Honda ATC 125M - restored
    1986 Honda ATC 70 with Lifan 107 - restored
    1979 Yamaha DT 125 MX

  9. #9
    Join Date
    Jul 2016
    Location
    Pennsylvania USA
    --
    65
    If it only runs with the choke the carb is either clogged or needs some fuel/air adjustment


    ~Matt Gusciora

  10. #10
    Join Date
    Apr 2017
    Location
    US
    --
    5
    Found that I am missing gaskets where the carb mounts. Going to pull the carb and clean it, again, and make some gaskets this afternoon.

    Sent from my XT1585 using Tapatalk

  11. #11
    Join Date
    Apr 2017
    Location
    US
    --
    5
    Decided to check compression just for fun and it only has around 60 psi. Guess it's time for a top end rebuild.

    Might be a little bit until anything new happens.

    Sent from my XT1585 using Tapatalk

//ArrowChat Integreation Code //