Remove ATC 90 front wheel

[LapU]

I've searched pretty thoroughly, no dice. I just picked up a 90 and have a few things that need to be addressed.

I removed the castle nuts and am wondering if the bolt passes through to like an axle normally would on a dirt bike It also looks like a bicycle fork in some ways, remove the castle nuts and the wheel might just drops straight down. It's a little froze up so I don't want to force anything. What's the method for removal?

[magilla12]

You have to remove the axle, there are spacers on each side that won’t let the axle go thru the slot.


Sent from my iPad using Tapatalk

[LapU]

So drop the castle nuts, pound it through.

[magilla12]

So drop the castle nuts, pound it through.

Pretty much. If it’s stuck you might want to soak it in penetrating oil


Sent from my iPhone using Tapatalk

[magilla12]

Take the nuts off both sides then remove the little spacers on each side and the whole thing will come off the forks.


Sent from my iPhone using Tapatalk

[magilla12]

These little spacers keep it form dropping out of the forks.


Sent from my iPhone using Tapatalk

[coolpool]

Magilla speaks the truth, get those collars off and the wheel/axle combo will drop out. The you'll have to deal with the potentially seized axle collars. One thing at a time!

[LapU]

All good guys, thanks. I just has to get underneath those collars with a straight edge and they wiggled free. The build is underway!