First Time Rider
Arm chair racerNew to the board
So I was bored at home and I tried putting a 125m hug on a 200 bottom end. And what do you know it fits right on there. Even the 200 head works to. Only thing I'd have to figure out is the rod and piston because the 200 has more stroke. But my question is would there be any practical reason to do this?
Power User
The day begins with 3WW
No reason imo , now putting the 200x head on a 86/87 125m is were you will see an improvement .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
First Time Rider
Arm chair racerNew to the board
yea thats what i thought to. but the cool factor is what i was thinking of. i mean i've never seen it done before
At The Back Of The Pack
Arm chair racerAt the back of the pack
that would be can of cool
Power User
Roostin Away
So you are working a 86/7 125m ? Not the lay down ones?
If its on the internet its got to be true they can't put any lie's on the internet
First Time Rider
Arm chair racerNew to the board
No it's a lay down 125Originally Posted by big specht
Formerly barry_mann
Got the holeshot
They will bolt up.....sorta but the stroke is all wrong among other things....... and there is alot of other things.
Never argue with an idiot. They will bring you down to their level and beat you with experience.
Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.
1981 Wife ( Project)
Reply With Quote
