Results 1 to 5 of 5

Thread: 2nd Gen 250r aftermarket axles

  1. 07-23-2018, 04:00 PM #1
    MtPleasantMadmn's Avatar
    MtPleasantMadmn
    MtPleasantMadmn is offline New to the board Arm chair racerNew to the board
    Join Date
    Oct 2014
    Location
    Frederick Md
    --
    27

    2nd Gen 250r aftermarket axles

    I have been considering building another air cooled 84 250r racer. I know the 83- 85 200x ,81-84 250r aftermarket axles all interchange. But aside from dropping a fortune on a new Durablue (if they still make them)These axles are hard to find. I was wondering if anyone found a later model quad axle/carrier to work in a 2nd gen R. Thanks
    Reply With Quote Reply With Quote
  2. 07-23-2018, 06:42 PM #2
    Jwheeler's Avatar
    Jwheeler
    Jwheeler is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Feb 2011
    Location
    San Marcos Ca.
    --
    716
    Hay good afternoon. I was told the EX300 axles are interchange-able with 83-85 200x's . I was told that, not for sure. If so, I maybe able to help. Oh yes Durablue still makes axles for what ever you want in ATV sport. Let me know if that helps you. JW
    * 1970 US90 Red
    * 1978 ATC 90/180 Helm&Son, Bandito /3D springer. ( Spaghetti Winder )
    * 1978 ATC 90/128 Bandito / Ace Williams Springer.
    * 1980 ATC 110/ ? Helm&Son, Dickson Full Suspended
    * 1981 ATC 110 MTC Full Supended
    * 1985 ATC 200s
    *1986 ATC 250R/310 2"+ Westcoast Swinger

    http://www.ebay.com/usr/jwheeler760
    Reply With Quote Reply With Quote
  3. 07-26-2018, 08:37 AM #3
    ATCKevin's Avatar
    ATCKevin
    ATCKevin is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Apr 2018
    Location
    Michigan
    --
    179
    When I bought my 84 R, it had a 200x axle in it with wheel spacers. I decided to find a used stock axle. I'm not a fan of running wheel spacers. I still have the axle and spacers.
    Reply With Quote Reply With Quote
  4. 07-26-2018, 05:53 PM #4
    oldskool83
    oldskool83 is offline Power User The day begins with 3WW
    Join Date
    Jul 2005
    Location
    Williamstown PA
    --
    5,825
    You can put about any Honda axle in a Honda. You need to make spacers and watch for id / od of bearings. I put 300ex in 1st gen200x. 2nd gen r and 2nd gen 200x use same bearings. It's all about spacing. 300ex axle in 1st gen 200x is way harder then 2nd gen.

    Online on partzilla they say all bearing and seal sizes, then tell you what it's all used on. If you can't use the free info to make it work hre will built you whatever swinger you need running newer honda stuff.

    I mean I just blew 450rcaliper on an 86 atc250r. Did it same way by looking things up.

    I have a post on here about my deal on my kx112 200x. Has too much info. The swap might cost ya $200 max used. Maybe more new.
    Reply With Quote Reply With Quote
  5. 07-27-2018, 01:29 AM #5
    HondaRidr's Avatar
    HondaRidr
    HondaRidr is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Sep 2010
    Location
    Salt Lake
    --
    343
    Quote Originally Posted by MtPleasantMadmn View Post
    I have been considering building another air cooled 84 250r racer. I know the 83- 85 200x ,81-84 250r aftermarket axles all interchange. But aside from dropping a fortune on a new Durablue (if they still make them)These axles are hard to find. I was wondering if anyone found a later model quad axle/carrier to work in a 2nd gen R. Thanks
    I know the 83-85 200x and 81-82 250r axles interchange but not sure about 83-84 250rs.

    Sent from my SM-G930T using Tapatalk
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //