350x crank seals

[6spdls1z28]

I'm trying to get the seal for the left side case and there is 4 different part numbers
#19.

Sent from my XT1635-01 using Tapatalk

[Shep1970]

There all the same part: 29x45x8 seal. The 91213 is the part# the next 6 digets are make of bike and yr. the part just fits 4 diffeent bikes.

99% of the time anyway....

Shep
Jeez my spelling stinks, I was rushed

[6spdls1z28]

There all the same part: 29x45x8 seal. The 91213 is the part# the next 6 digets are make of bike and yr. the part just fits 4 diffeent bikes.

99% of the time anyway....

Shep

Ok cool. This number even came up for Honda car engines.

Sent from my XT1635-01 using Tapatalk

[Dirtcrasher]

Doesn't matter. Sometimes it's a newer part number, other times it cross matches other machines.

Honda uses HA5 HA0 HA2 HB# etc etc, which denotes the type of machine, so a 350X seal that's also used on a 450R, would have 2 part numbers...

[6spdls1z28]

I also need the oil seal for the front sprocket. The Honda one is discontinued but Kawasaki and Polaris have one the same size do you think it would work?

Sent from my XT1635-01 using Tapatalk

[Shep1970]

Just get the seal at a regular bearing + seal company——u may need to buy 5 though? That’s what I’ve done in the past for discontinued seals- http://www.vxb.com/Oil-and-Grease-Se.../tc22x35x8.htm

That way you’ll know they fit and not from China or other———-

Shep

[6spdls1z28]

Just get the seal at a regular bearing + seal company——u may need to buy 5 though? That’s what I’ve done in the past for discontinued seals- http://www.vxb.com/Oil-and-Grease-Se.../tc22x35x8.htm

That way you’ll know they fit and not from China or other———-

Shep

Alright I'll pick up a few

Sent from my XT1635-01 using Tapatalk