First Time Rider
Arm chair racerNew to the board
Do all 185/200 hard tail engines use the 3 bolt front sprocket retainer?
I was poking around online for an 8 tooth sprocket and found one but it dosent have the 3 bolt holes in it for the retainer, did certain years use something else to hold the sprocket on?
Power User
Roostin Away
8 tooth sprocket more then likely you would have to use a c-clip in the shaft. I had a 10 tooth on a 185/200 and the stock 3 bolt retainer was rubbing on the chain just a little.
"I'm Kind Of Like The Turtle Man Of 3Wheelers."
1986 Honda 350X
1985 Honda 250R
1985 Honda 200X
First Time Rider
Arm chair racerNew to the board
Ok. I hadnt seen one setup with anything different to hold the sprocket on, so like a snap ring or e-clip would do it then?
Power User
Roostin Away
Yup should be fine.
"I'm Kind Of Like The Turtle Man Of 3Wheelers."
1986 Honda 350X
1985 Honda 250R
1985 Honda 200X
Reply With Quote