Sportvette... KXT Pics

[motoman1012002]

Sweet bikes jeb im goin to build a 2 sroke this summer from ground up so I can build it the way i want it. I dotn know if i want a 250r or tecate

[350Xccelerator]

Motoman you should probably go with a 250r since parts are alot easier to find than those for the T3 it would be alot easier and less headaches. Awesome trikes Jeb!!

[TeCaTe_MaN]

parts are easier to find because of people like you..if more people had KXT's there would probrably be a whole lot more stuff out there just like the R's :?

[short4stuff]

is it just me or is the 8 on the Z starting to peel on the top corner ???


Nice trikes. I love those tires on the R

[Jeb]

Thanks again for the compliments guys!

Now all you need are the two sport four-stokes!!

I'm about all "triked" out. :shock: No more trikes for me until I breath life into that 250R again. Unless I find one local, in good condition and dirt cheap. I should have brought the ATC70 out too.

I can't believe you had snow the day before, its so summer like in the pictures.

Yes, it's been pretty nice around here all week.

Jeb, where did ya get the green dust covers on the forks?

They were provided to me by the miracle of ebay a couple years ago.

can you tell me what the sizes are of the rear rims and tires on the r and where i can get some? do you ride in the snow?

Again, those tires are Dico Fast Trekkers. The rims are stock R rear rims as far as I can tell. Tire size is 18x11-9. Titan makes the Trekker line these days and I don't think you can get the 18x11-9 anymore. You can get 18x11-10 and some aftermarket 10" rims. Those Trekkers on my R are pretty worn. I'd love to have a new set but I think we're S.O.L. there.
We dont get much snow down here so it's very rare to get to ride in the snow. I didn't get to ride Saturday when it snowed.

...you should probably go with a 250r since parts are alot easier to find than those for the T3

I hate to admit it, but I have to agree. I've learned this recently thanks to my R. Parts are everywhere. New OEM, Used OEM, and aftermarket. And I've gotten parts for pennies compared to what they might go for on the KXT.

is it just me or is the 8 on the Z starting to peel on the top corner ???

:shock: :oops: It looks that way, but those numbers cannot peel. They are thick, hard plastic with posts on the back. They are old school numbers designed for 3-wheeler vented screen plates. You press the posts through the screen mesh and self threading plastic nuts are threaded on the posts to hold them on. You literally bolt them on instead of stick them on. You'll never get sticker numbers to stick to the screen mesh.

[sportvette]

thanks for posting the pictures Jeb. You have some nice trikes.

thanks,
mark

[250SX_rider]

I really like your trikes...they all seem to be in mint condition...especially the KXT 8) get your R done soon!!

[jdulac]

Which is your favorite? I like the R. But i've always been a honda man.

[Jeb]

Like I said earlier in an earlier reply, I prefer the KXT.

I ride the Z and KXT. Well most of the time I ride the KXT and my brother rides the Z. I try to take good care of them. They are fairly nice rides but not mint! I'm kind of glad they are not mint as I would never get to ride them.

Thanks guys!