First Time Rider
Arm chair racerNew to the board
Hello all, I’m in the market for a 125cc ATC and see a wide variety of of prices. If I wanted a second gen 125m in clean shape what should I expect to pay? NADA says about $1k but it doesn’t differentiate between the 85’ and 86’ 125m values, both show about $1k in excellent shape. But the two are totally different trikes? Thanks!
At The Back Of The Pack
Arm chair racerAt the back of the pack
prices vary depending on your location and condition of the machine. the few second gens I have seen in my area have all been in decent condition (good rider quality) and price have ranged from 800 to 1500. a first gen 125m isn't worth as much, I can pick one in similar shape for about 400 to 500.
Currently : trx400fw, ct70, 250es,200x, xl80s, 350x, 350x, Trx250X,ALT185
Power User
4 Wheels? Huh?
Dave is spot on in my opinion. Second gen's are harder to find, and the ones i have seen turn up are usually $1k and up, last one i saw was $1600 and it was pretty nice. They just are not as common unfortunately. The first gen are prolific and cheap as chips. I can pick them up for the sub $500 range all the time here, people always want the larger trikes now it seems like.
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
First Time Rider
Arm chair racerNew to the board
Thanks for the quick replies! That’s exactly what I needed to know!
Power User
4 Wheels? Huh?
When you snag one be sure to come back and post some pics!! We all like to see em here! LOL
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
First Time Rider
Arm chair racerNew to the board
By the time you posted this it was already in the bed of my truck. It’s not a concours level bike but definitely a survivor! It’s not like me to buy a nice bike, usually I buy basket cases or good cores with rough aesthetics and nurse them back to life but this little guy appears to have been maintained to my standards thus far. Runs great, need to lube the rear brake pedal pivot and that’s all I can find so far. I ordered a low pressure tire gauge this morning to get the tires dialed in. Other than that all it needs is to be ridden!Originally Posted by kb0nly
Last edited by 1stGEN110; 10-10-2020 at 04:38 PM.
First Time Rider
Arm chair racerNew to the board
There must be a post limit to post pics. I’ll put up some pictures ASAP.
Reply With Quote