At The Back Of The Pack
Arm chair racerFirst time rider
Ok, heres what i knwo and correct me if im wrong.
I will sand what im doing if there is any paint on it. If theres crud or grease i remove it. I then spin my little wheel on whatever im polishing. Then i get a fine rag and i dab it in the compund and i wax what im polishingin circles. Then i let it set for a few minutes. then i polish it every once in a greta whiel to keep it shineing?
tell me if i got this right.
and i need any polishign equipment any oen has.
At The Back Of The Pack
Arm chair racerFirst time rider
is there any negatives abotu polishign?
At The Back Of The Pack
Arm chair racerFirst time rider
the only negatives i know of are that you HAVE to keep it clean or it looks like chit. if you polish anything that is made to disperse heat it takes away from that quality.
Tim is the name
85 350X(86 motor)
83 200X(stripped down for a total rebuild)
85 200S(project)
Got The Holeshot
Arm chair racerJust too addicted
yea, it will take a while to get the scratches out...
Wanna race? ;-)
85' Tecate (still looking for entire front brake asembly...)
bonanza mini-bike
if you cant ride with the big boys...put it back on the trailer
First Time Rider
Arm chair racerNew to the board
not quite. your goin to have to polish that thing all the time to keep it shining. especially if you do any riding in water or mud. its a lot of work but if its done right, it looks great.Originally Posted by jason200x
"Son it's faster horses, younger women, older whiskey, an more money."
84 Tecate
84 Big Red
88 Blaster
01 Raptor
Reply With Quote