Seems about right.
Maybe post some more detailed pics, and possibly next to a OEM one.
Power User
Got the holeshot
Seems about right.
Maybe post some more detailed pics, and possibly next to a OEM one.
The story of three wheels and a man...
First Time Rider
Arm chair racerNew to the board
Here is my second prototype. I am almost to the finished product. I just have to increase the line width to get rid of the line marks on the top and then sand for a smooth finish. I dont think people would buy this if they could see lines. Dont have pictures of the oem one, I gave it back to the owner two days ago.
Got The Holeshot
Arm chair racerJust too addicted
Hey mike33,
I gave you a plug for your 3d printed headlight in my latest video.
I sent them here and ebay. Good luck
Now when are you going print up me a 185s rear. fender?
J/k
mrc_builds on YouTube Channel
https://www.youtube.com/channel/UCmw...confirmation=1
My Addiction
85 350x "The Nice One"
86 350x
85 350x "Yard Sale" Flat Tracker
84 250r "lucky"
85 250sx "Enterprise"
85 350x "The Money Pit"
85 350x "Code Red"
86 250r "Unicorn"
86 trx250r
88 Lt250r Suzuki
83 Z50r
85 ATC 70
88 KD80x
85 CR250r
84 KXT250r Tecate
mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1
Power User
Roostin Away
Are you also offering the rubber latch and the two hinges as well?
I bought two of these when they were offered many years ago. Not sure if there would ever be a run of these repops again.
http://www.3wheelerworld.com/showthr...ight=trunk+lid
Power User
Got the holeshot
Ha! I thought the lines were intentional, like on a 200ES trunk lid that has a similar pattern.
I haven't looked at a 125 trunk lid in a while and didn't realize they're smooth.
The story of three wheels and a man...
Power User
Roostin Away
You try a heat gun on it yet ? To see it that smooths it out ?
If its on the internet its got to be true they can't put any lie's on the internet
First Time Rider
Arm chair racerNew to the board
I dont have a heat gun but have used a hair drier and it tends to warp the plastic before smoothing.
Power User
Roostin Away
Ok I’ve tried on on some parts but from what I found it depends on layer thickness if you see the infill lines or not. But yea it might warp that big of a area. The harbor freight heat guns work good for the price.
First Time Rider
Arm chair racerNew to the board
What material is it made from? Original is a bit rubbery. Are you sure the printed part will hold up, withstand UV, etc.?
First Time Rider
Arm chair racerNew to the board
It is printed with pla, is clear coated in plastic coating that this uv resistant, and is very sturdy.
Last edited by Mike33; 03-15-2021 at 11:31 PM.
First Time Rider
Arm chair racerNew to the board
AtcKing and Patriot1, I sent you guys a dm about the lid.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Got your message. Thanks Mike!
Got The Holeshot
Arm chair racerJust too addicted
Great job man looks great,
1982 ATC 70
1983 ATC 200E yard rat
1984 ATC 200X
1984 ATC 200S (X2)
1985 ATC 70 (X2)
1985 ATC 200S
1985 ATC 250R
1986 TRX 70
1986 ATC 350X
2004 kfx 700 XC
2006 prarie 700 XC
2009 Brute Force 750
2020 CF Moto 600
Power User
Got the holeshot
The mail lady delivered it today and I've already installed it. I've got a new rubber strap ordered, but it hasn't arrived yet.
It fit great and now there isn't a gaping hole on the rear of the 110. That was all it needed to have a finished look.
Here's a pic of the 110 it went on:
Overall, a pretty clean and complete 110, if not wholly OEM. That missing trunk lid was really bugging me, and it's not even my trike.
That was a pic from earlier, and it's been sitting a while, so the rest of these show it dusty.
The biggest thing I want to point out is the crappy way the metal seat pan is designed. The very rear of it is just thin, flat, sheet metal, so it bends easily, and this one was bent. When I first put the lid on, it was obvious. I removed the seat from the fender to straighten it, but that wasn't really necessary, because the metal is so thin. Just an FYI for anyone with one of the 110/125 trikes. That's probably why so many of the lids end up broken and missing. The seat back gets bent, and someone tries to force the lid open.
Yes, there is the provision for the rubber strap. I have one on the way, but it wasn't here in time for the install.
A shout out to Mike33 for printing these up. He got it shipped pronto and it installed and fit like it should. Mike33, maybe you could do custom ones with patterns or even logos/words on them? That would be trick.
Last edited by ATC King; 03-26-2021 at 09:38 PM.
The story of three wheels and a man...
At The Back Of The Pack
Arm chair racerAt the back of the pack
I also got mine today. Very impressed! I feel that I got a great deal on a great product. I even got a 3WW special gift as a bonus!!! I again agree with King on the custom/trick lids! Thanks Mike!! It's going on my blue one (Jake of Jake and Elrod)
Reply With Quote