//ArrowChat Code
Results 1 to 5 of 5

Thread: Pit bike motor in atc70

  1. #1
    Join Date
    Aug 2020
    Location
    Snowflake Arizona
    --
    72

    Pit bike motor in atc70

    Have seen this swap done before with electric start engines. Had a zongshen 110cc pit bike motor bolted it in the atc70 frame now I can't start it because the kicker hits the exhaust. Anybody got a remedy for this. Don't have fenders on it right now.

  2. #2
    Join Date
    Apr 2014
    Location
    Edmond, KS
    --
    2,558
    My guess is that you'll have to modify the kicker so that it will clear.

  3. #3
    Join Date
    Aug 2020
    Location
    Snowflake Arizona
    --
    72
    For now I think I'll make a grab bar and pop start it. Maybe I'll find a kicker that has more offset than the one I have there's a lot off cheap chinese bikes out there.

  4. #4
    Join Date
    Apr 2023
    Location
    Ohio
    --
    3
    You can flip the kicker fwd and pull up on it to start it or buy a seat flip kit like mine

  5. #5
    Join Date
    Aug 2020
    Location
    Snowflake Arizona
    --
    72
    I'd also need wheel spacers to use the kicker. Got the tires holding air filled the carb bowl with fuel and put it in 2nd gave it a push it fired right up. Just picked up a plastic Clarke tank but the carb doesn't have a on off valve will a atc90 carb work.

//ArrowChat Integreation Code //