//ArrowChat Code
Results 1 to 3 of 3

Thread: Hello!

  1. #1
    Join Date
    Sep 2024
    Location
    USA, AZ
    --
    4

    Hello!

    Hi everyone! I'm new here. I'm the owner of a 1985 Honda ATC 250R, and I often run into the issue of uneven tire wear. Usually, I end up replacing all the tires to avoid problems. Is this a specific issue with this model, or is it common with all ATVs? What do you guys do in this situation?

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,747
    I would think incorrect tire pressure or the terrain where you ride could be factors .
    Also put the Atc on flat level ground, handle bars straight and look at it from the front , the frames and forks bend fairly easy on that model .
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Sep 2024
    Location
    USA, AZ
    --
    4
    I knew there was a slight bend where the fork starts, but I never thought it could be the cause. However, it's noticeable on a flat surface. Thanks for the advice.

//ArrowChat Integreation Code //