Ok, bear with me on this one. I’m getting ready to adjust my chain on my 82 200, as I rock the machine side to side, one of the bolts.. the top one on the chain side, is loose. The bolt has a nut I can see between the chain guard and the metal bracket that is welded to the frame ( no way to get a wrench on that) So my question is this; does the chain guard have holes that allow the 17 mm adjuster bolts to protrude into the gaurd, as to tighten the nut while the outside of the chain gaurd is removed? I’m trying to figure this one out, I have a manual it vague and there are not any videos of this. Thanks and I hope I’m making sense!