Registered User
New to the board
Fuses are good,lights and kill switch work,starter is good,new solenoid. Electric start will work if I jump.p the solenoid. I can't figure out why the push button won't work,and this is a different/used button I bought on eBay so I've tried two different buttons. Anyone know how I access the neutral sensor to check that ???
Power User
The day begins with 3WW
Is the green light coming on the dash , making sure it’s in neutral .
OEM CDI box or aftermarket ?
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Registered User
New to the board
My bike doesn't have a the light,not sure if it's just missing or didn't have one to begin with.
Registered User
New to the board
The cdi is OEM,I didn't replace that.
Reply With Quote