Got The Holeshot
Arm chair racerJust too addicted
that is the take-off clutch or centrifical clutch. if its slipping in the upper gears, than its the friction disc and plates that need changing, also the tension coil springs get.
still an easy fix, EBC makes a good kit that includes the plates/disc and springs for less than $100
MrC.
mrc_builds on YouTube Channel
https://www.youtube.com/channel/UCmw...confirmation=1
My Addiction
85 350x "The Nice One"
86 350x
85 350x "Yard Sale" Flat Tracker
84 250r "lucky"
85 250sx "Enterprise"
85 350x "Code Red"
86 250r "Unicorn"
86 trx250r
88 Lt250r Suzuki
83 Z50r
85 ATC 70
88 KD80x
85 CR250r
84 KXT250r Tecate
mrc_builds saves trikes like Jimmy Swaggart saved souls back in the day -said Patriot1
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks. So if the clutch is slipping in low gear that would indicate the centrifugal clutch?
Also, I ordered the oring and gasket for the centrifugal clutch. The gasket is listed as 'oil filter gasket', but there is no oil filter, right? Part #2
Reply With Quote