Registered User
New to the board
What rear axle hubs will fit my 1983 Honda ATC200? I know the bolt pattern is different from most (4x150) but if I switched to another bolt pattern say 4x110 for example what other trike or quad hubs fit the axle? I'm looking to extend the rear wheels out a bit my factory hubs are starting to rot out. I see all sorts of stuff on 200s, 200e, 200m, 200es but nothing on the plain 200. Thanks!
Last edited by JayS; 10-14-2025 at 03:42 PM.
At The Back Of The Pack
Arm chair racerAt the back of the pack
You should be able to use rear hubs from a Honda TRX250X, 300ex,400ex and/or 450R.
This will give slightly more width and a 4 on 110mm bolt pattern.
Put your butt on the inside fender or end up on the ground!
TRX450ER
ATC250SX
ATC350X
ATC110
ATC185S (Marlboro Red)
XR100R
CRF230F
Raptor 125
Breeze 125
Grizzly700
Got The Holeshot
Arm chair racerJust too addicted
If you don’t want the width as mentioned above stock 200x hubs , same 4-110 bolt pattern but narrower than the 400ex line up.
Sent from my iPhone using Tapatalk
Reply With Quote