1986 Honda 250SX Forks

[sweetip2000]

Original OEM oil from 1986 (whats left of it) in forks. Needs seals. Is it OK to loosen any nuts for drain and fill before taking the forks off ? I do not have a bench with a vice. Only hand held vice grips and I do not want to murder it. None of the nuts have ever been wrenched and I don't want to be the first to strip them because I am good at doing that. Got the bike from original owner.

[Dirtcrasher]

Original OEM oil from 1986 (whats left of it) in forks. Needs seals. Is it OK to loosen any nuts for drain and fill before taking the forks off ? I do not have a bench with a vice. Only hand held vice grips and I do not want to murder it. None of the nuts have ever been wrenched and I don't want to be the first to strip them because I am good at doing that. Got the bike from original owner.

Andy, my friend. Why wouldn't you go grab a 10mm and 12mm wrench? That's pretty much all you need to remove the forks. But, the wheel has to come off first. and a few other odds and ends.

Is your question can you drain and refill the forks with new oil?? Of course, by loosening the 10MM bolt at the bottom of the fork leg. And removing the cap (with a monkey wrench is all you'll have I guess). How do you plan to not "murder" any fastners when using vice grips?? How are you gonna change the fork seals?? Once they leak, they'll keep leaking. If this trike was original, why rush and harm it??

I so wish you kept that 350X I went through completely for you in one weekend while you were here. It was the best it could ever be...