Results 1 to 3 of 3

Thread: 1985 Yamaha 225DRN Trouble Starting

  1. #1
    Join Date
    Dec 2025
    Location
    Pennsylvania
    --
    2

    1985 Yamaha 225DRN Trouble Starting

    Hello,

    I'm new to the 3 wheeler world and recently acquired a 1985 YTM225DRN. I've had it running before, but it's extremely difficult to get started. I haven't rebuilt the carb yet, finding the right kit has been challenging. I've replaced the fuel hose to the carb, got a new key made, dumped all the old gas out of the carb, and charged the battery.

    Any tips to get it running, even if temporarily before I attempt to rebuild the carb?

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,809
    I would start with the carburetor rebuild first . Most of the parts needed are still available new from Yamaha .
    Parts I would replace are 13 , 15 , 20 and 24 .
    https://www.partzilla.com/catalog/ya...drn/carburetor
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Dec 2025
    Location
    Pennsylvania
    --
    2
    Quote Originally Posted by shortline10 View Post
    I would start with the carburetor rebuild first . Most of the parts needed are still available new from Yamaha .
    Parts I would replace are 13 , 15 , 20 and 24 .
    https://www.partzilla.com/catalog/ya...drn/carburetor
    Appreciate the info. I will try to give that a go then. Never rebuilt a carb before, but these at least seem not too complicated.

//ArrowChat Integreation Code //