Results 1 to 4 of 4

Thread: No Fire

  1. 12-10-2002, 04:54 PM #1
    250rcrzy
    250rcrzy is offline New to the board Arm chair racerNew to the board
    Join Date
    Oct 2002
    --
    19

    No Fire

    I have a atc 90 year 76. The problem I am having is that it will not start by pulling the pullstarter. The only way to get it to fire is buy pull starting.
    The timing is set, I have spark when i ground the plug out on the head and use the pullstarter. Does anybody have any suggestions. :?
    Reply With Quote Reply With Quote
  2. 12-10-2002, 05:34 PM #2
    Guest
    If you have spark you have fire. Points more to a fuel problem to me.

    Has the bike been sitting long? If it has, the carb will need a little TLC i.e., a good cleaning with a new rebuild kit to boot.
    Reply With Quote Reply With Quote
  3. 12-10-2002, 06:09 PM #3
    atcpunk107's Avatar
    atcpunk107
    atcpunk107 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Dec 2002
    Location
    Harpursville NY
    --
    428
    try dumping some gas derredtly down the head and then try it
    Im just a racing redneck.
    Reply With Quote Reply With Quote
  4. 12-10-2002, 08:06 PM #4
    Howdy's Avatar
    Howdy
    Howdy is offline Putting Priorities in Order, Busier than ever. Catch me if you can
    Join Date
    Sep 2002
    Location
    Celina, Ohio
    --
    10,079
    Have you checked the compression? IF the rings are wore down and you have low compression it will make it hard to start.

    Howdy
    Wheeling and dealing.

    If you have done any buying or selling deals with me, Then Please leave me feedback here: My 3WW Buying and selling Feedback
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //