Registered User
New to the board
can anyone help me here i just bought a 83 yamaha 175 tri moto and the intake has three out of foure bolts broken so its sucking air and wont start how can i fix this at home without spending all kinds of money any help would be great :? :?:
OK I AM GOING TO DO THAT BUT WOULD THIS PROBLEM ALSO KEEP THE BIKE FROM RUNNING IT TURNS OVER REALLY GOOD BUT WONT START IF YOU JACK IT UP ON BLOCKS ITS STARTS BUT AS SONN AS YOU PUT IT DOWN AND TRY AND GO IT BOGS DOWN AND STALLS HELP HELP
First Time Rider
Arm chair racerNew to the board
well, iv never messed with a tri-moto, but if you mean the bolts are broken off and you cant get them out, you need to get some bolt-out's or easy-outs and get them out, then re-seal it and put new bolts in it. i figure that would be the best thing to do.???????
85 200x
86 cr 125r..(in peices)
85 200x..project!
Power User
The day begins with 3WW
welcome to the board! Are the bolts broken off flush? Sounds like your going to have to drill them out and rethread the holes.
My Feedback 85 TECATE 500 08 Honda 450R
At The Back Of The Pack
Arm chair racerFirst time rider
They sell cheap kits for taking broken bolts out and rethreading if necessary at Princess auto.(Im talking about like 15$)
Still learning how to use and abuse my toys.
Power User
The day begins with 3WW
Yeah Princess Auto is the best company I've delt with. So many great tools and parts for so damn cheap.
My Feedback 85 TECATE 500 08 Honda 450R
Just Too Addicted
Arm chair racerJust too addicted
princess auto is where i buy all my tools they have a nice cylinder honing tool that attaches to a drill i wanna pick up,it only $15 not a bad price.I know a guy that has one and he says it works great.
Reply With Quote