At The Back Of The Pack
Arm chair racerFirst time rider
I'm having problems with my 2nd gear, and 5th gear. this is on an air-cooled R. when i shift into 2nd gear and try to accelerate it starts clunking and feeling like the chain is slipping, but it's not. 3rd & 4th gear work fine, but when i shift into 5th all of the sudden it feels like i stepped on the brake, and the engine really strains... i really dont know what is or could be causing this, so any help would be appreciated.
Thanks
~~~Rich
I'm currently riding:
1984 honda110
1982 honda185s
1986 honda bigRed
1984 honda 250R-- .80 over, cobra expansion chamber, shaved head, decked cylinder, larger carb., carbon-fiber reeds, 18" carsliles, RK race chain, uni-filter.
1986 yamaha IT200
1985 yamaha XT250
1978 Italie Snark Moped
and some vintage dirtbike.
Wires, Hoses, & Digital Wizardry.
Got the holeshot
Sounds like transmission problems to me. If you split the cases, I'll bet the problem will be readily apparent. Look for worn bearings, gears, gear shafts, etc. A good manual will have all the wear limits & tell you what to look for.
Banned
The day begins with 3WW
Youve got a couple of gears with the side meshing knobs rounded that will need replaced.
As Red Rider said, youll need to go in and do some exploratory surgery.
At The Back Of The Pack
Arm chair racerFirst time rider
well the thing is that i just put this tranny back together, to put new parts in, I put it back together with a manual,but i must of missed something... so i guess it's time to take it apart again...
I'm currently riding:
1984 honda110
1982 honda185s
1986 honda bigRed
1984 honda 250R-- .80 over, cobra expansion chamber, shaved head, decked cylinder, larger carb., carbon-fiber reeds, 18" carsliles, RK race chain, uni-filter.
1986 yamaha IT200
1985 yamaha XT250
1978 Italie Snark Moped
and some vintage dirtbike.
Power User
Roostin Away
off subject but........ there was a kid out your way that had a 83-84 R with tranny probs,, his fathers name is Arliss, he has a lifted blue chevy... is this the same R??? PM me with what Big Red parts you need.........
1985 250R Selveys port job and pipe
1985 70 piped for lil'freaks
2001 TRX90
ATC 90+250R+BEER= Drag Bike
1984 ATC70 Pit bike
1984 110 for sale
Got The Holeshot
Arm chair racerJust too addicted
sounds kinda like you got a missing tooth or maybe two on your 2nd gear, the 5th is kinda odd...
Wanna race? ;-)
85' Tecate (still looking for entire front brake asembly...)
bonanza mini-bike
if you cant ride with the big boys...put it back on the trailer
Power User
Roostin Away
O my sounds like your fearin it. :shock:
Well time to tear her all the way down and do a full restoration
84-85 Custom Tecate
1986 Honda 200X Daily Rider
2006 Suzuki King Quad
Power User
Roostin Away
I want your IT 200 PLZ
That my dream enduro.
Hook a brother up. You will need the money to fix the R
84-85 Custom Tecate
1986 Honda 200X Daily Rider
2006 Suzuki King Quad
At The Back Of The Pack
Arm chair racerFirst time rider
Well i took it all apart... again and all of the gears are in great looking shape, i'll take them apart and put them back together with the manual, and see if it helps at all.
And yea Freaksfix this is the same wheeler, but i didnt want to deal with that tranny so i just got a different one off of someone from the board.
I'm currently riding:
1984 honda110
1982 honda185s
1986 honda bigRed
1984 honda 250R-- .80 over, cobra expansion chamber, shaved head, decked cylinder, larger carb., carbon-fiber reeds, 18" carsliles, RK race chain, uni-filter.
1986 yamaha IT200
1985 yamaha XT250
1978 Italie Snark Moped
and some vintage dirtbike.
Banned
The day begins with 3WW
Look closely, not at the teeth on the gears, but the knobs on the sides of the gears where they slide over on the shaft and meet the gears next to them on the same shaft. If they are rounded, even a little bit, it will go into gear, grab, and lock up the gearbox. When my Z, did it, you had to push it backwards to get it to unlock so you could shift it back out of gear.
First Time Rider
Arm chair racerNew to the board
cou;d jsut be a missin clip or shim somewhere making the mesh to far apart...check that...
1982 Suzuki Sierra 1L - Nissan MQ axles and 38" TSL Swampers
1982 LWB SIII Stage one Land Rover Tray Back- 4BD1 Isuzu powah!
Clean enough to eat a potpie off of
Teaching quads a lesson
Huh?Originally Posted by BIG BAD RED
R.I.P Raven
2006 Yamaha Banshee Special Edition
1996 Honda CBR 600 F3
At The Back Of The Pack
Arm chair racerFirst time rider
well i checked everything over today, and it turned out that i was missing a washer on one of the shafts, so i put it on , and now everything works great.
kind of alot of trouble, for just a little thing.
I'm currently riding:
1984 honda110
1982 honda185s
1986 honda bigRed
1984 honda 250R-- .80 over, cobra expansion chamber, shaved head, decked cylinder, larger carb., carbon-fiber reeds, 18" carsliles, RK race chain, uni-filter.
1986 yamaha IT200
1985 yamaha XT250
1978 Italie Snark Moped
and some vintage dirtbike.
First Time Rider
Arm chair racerNew to the board
i win..thats what i said whoever couldnt read it
1982 Suzuki Sierra 1L - Nissan MQ axles and 38" TSL Swampers
1982 LWB SIII Stage one Land Rover Tray Back- 4BD1 Isuzu powah!
At The Back Of The Pack
Arm chair racerFirst time rider
Yea Big Bad Red wins the big prize :-D
I'm currently riding:
1984 honda110
1982 honda185s
1986 honda bigRed
1984 honda 250R-- .80 over, cobra expansion chamber, shaved head, decked cylinder, larger carb., carbon-fiber reeds, 18" carsliles, RK race chain, uni-filter.
1986 yamaha IT200
1985 yamaha XT250
1978 Italie Snark Moped
and some vintage dirtbike.
Reply With Quote