Got a 1987 250es

[atcmatt]

Gday,

Well today my dad went and picked up my 250es from the trucking depot. Quite frankly its a heap of you know what. I expected that, only paying $175 for it. Im not sure what to do with it. Fix it up or keep it for parts for another 250es i dont have, lol. It needs the frame welded up under the right side footpeg as its been rusted through and welded up heaps crap. I think i will just cut it and get a whole new piece welded on there. Has anyone done any repairs like this before? I dont have any pics as of yet but i will get some up during the week. It sure is a wonder how anyone can let such a great machine go to scrap from lack of maitenance. More than likely it was a lazy farmer who owned it. Kinda makes me wanna cry!.......I will be in need of parts for this machine, if you have any let me know by sending an email to atcmatt@optusnet.com.au

Just let me know what you have and ill see if i need it (i need alot)

Well i best stop boring you, i will have them pics up before the end of the week.

Matt

[jeswinehart]

what's the rest of it like matt ,,, motor turn over at all ???


john

[atctim]

I didn't know there was such a thing as a "Lazy Farmer"??????

[thefox]

My brother had his frame on his old motorcycle welded last summer. He had a shop do it, they cut out the old piece (by the footpeg like yours) and welded in one from another bike. When they were done with it, it looked great, you really had to look at it to see that it was pieced together. I am sure it would be easy enough to do youself, just find a cracked frame to cut up.

[trikerider2oo7]

is that thing saying 1987 a typo?

[atcmatt]

The motor turns over using the kickstart. It sometimes has compression and other times it doesent. Maybe it has something to do with the compression release? It seems to shift fine also. The rear end diff and that looks pretty rusted up but to me looks like it could be blasted off. I think i will restore this bike, just not sure if it will be better to wait for another one or get into it? Yes it is a 1987, no typo there. On the compliance plate it clearly says, 1987 model, 1/87. What are the shipping rates from america to australia? Expensive?

Matt

[trikerider2oo7]

yes, it will be very expensive.they will either have to fly or boat it to you and that cant be cheap and then all the weight...

[atcmatt]

Im going to keep it and get it fixed. I really dont want to wait for another to come around.

Ill keep you posted and ill get somne pics tomorrow.

Matt

[wolfspider]

hi matt
i`m in the uk and used to have an 87 250es, it was a fantastic machine and the best wheelie bike i ever had, i hope you do fix it up.
i have a few 250es parts but like you said shipping would be expensive.
i have a really good front fender, std size piston and barrel and a front pipe in good nick.
good luck with your project.
steve. :-D

[atcmatt]

How much do you want for the front fender?

Matt

[wolfspider]

i`d guess at about 20 pounds for the front fender, i don`t know what the pound is compared to aus money.
but i can take a pic of it for you if you like.
cheers steve

[atcmatt]

Hey steve,

Do you have msn messenger? If so my email is mattmendel@optusnet.com.au and if you want to send a pic send it to atcmatt@optusnet.com.au

Thanks,

Matt

[atcmatt]

Oh damn sorry its actually mattmendel@hotmail.com for msn and the other one is correct :oops:

20 pounds converts to 50 aus dollars, plus shipping, i will have to think about it.


Matt

[wolfspider]

yes i have msn i`ll add you to my contacts, i`ll try and sort oua photo today for you.
cheers steve.

[broook]

I don`t know about Australia but here in Canada its the IMPORT DUTY that kills everything on top of the postage. Be careful if you buy anything of any value. Usually if I buy anything from the states I figure on double the money for items over about $30.00 Under $30 they don`t seem to bother.

I have two 86 250es`s they are the best trikes I have ever ridden. 87 should be great.

Good luck