got the trimoto goin

[4x4chevette]

Got the tri moto runnin yesterday. it smokes real bad, and will be getting rings soon. But at least shes running now

[edog]

Keep it running forever.Like to see some pics of it if your planning to restor it.

[4x4chevette]

Its my lil brothers... aitn never gonan eb restored, it sin to bad of shape... we jsut got it runnin so he had soemthin, and I didnt hafta let him burnt he clutch outta mine.lol

[350x'inNY]

Cool..... I got a whole shop full of YTM200E and 225DX parts in my shop and now a few 200X frames/swingers, etc.... Let me know if you need something.

Bruce

[4x4chevette]

Cool..... I got a whole shop full of YTM200E and 225DX parts in my shop and now a few 200X frames/swingers, etc.... Let me know if you need something.

Bruce

Got any bearign carriers for a 200x, or 350x... Ive got a 350x swingarm on my 200x and the carrier is busted. got 200x swingarms and no carriers...lol
Could use a rear brake caliper for either of the bikes also.

[350x'inNY]

Got any bearign carriers for a 200x, or 350x... Ive got a 350x swingarm on my 200x and the carrier is busted. got 200x swingarms and no carriers...lol
Could use a rear brake caliper for either of the bikes also.

Hmmmm.... my spare 350X Carrier I traded to Xowner from the site here for the Hondaline Front Fender Extender. He tried to sell it back to me, so see if he still has it.

I'll check those 200X frames I got... I know a couple had the swing arms and rear shocks, but not sure about the carriers. (I haven't even unloaded them from my trailer!) I know the one 200X had the resevoir and master cylinder, but was missing the caliper. I got a 350X caliper in a parts lot, but it looks pretty beat and froze up beyond belief!!!!

Bruce

[4x4chevette]

Welp... I definatly need to drop soem ring sin the trimoto... road it less than 2 hours and it went completely dry on oil...

[yamaha200E]

i am partin my 83 ytm nothin wrong just need rings. let me know if u need anything.

[4x4chevette]

Do you have a frotn brake cable and lever? And a good carb?

[edog]

Can you give me parts list on the 225dxn parts?Can you tell me if you have any sky blue plastic,or black plastic?

[350x'inNY]

225DX Parts......

2 Complete Swingers/Rear Ends/Shocks
2-3 Seperate Rear End Gears
2 Stock Rear Axles, One Durablue +3"
3 Motors/Heads/Cylinders/ Etc...
Box of Wiring Harnesses, Light Bulbs, CDI's Coils, etc.
Set of Blue Plastics (minus front fender)
Set of Yellow Plastics (minus front fender)
Headlight covers (2 Yellow) (1 Blue)
2 sets of Forks
4 Seats.... rough shape.
1 Complete Bike
4 Gas Tanks
Misc Tires and Rims
6 Carbs
3 Air Boxes
3-4 Throttle Levers/Cables
Bunch of Rear Brakes, Covers
Bunch Front Axles, Front Brake Hubs
Rear Rack with mounting Hardware.... Front Rack for 225. Fold Up rear rack too... (Mounts to Footpegs and grab bar... swings up above handlebars.)
Misc Tires and Rims

Some stuff for sale, some to upgrade the 225 and my 200ERN's.

Bruce

[4x4chevette]

How bout front brake cabvle/lever and a good carb....

[350x'inNY]

Do not have any frames/trees/or handlebars. Thus I don't have many levers and cables.

I know I have 3 good carbs.... to put on my 3 Yamahas..... there are 6 other carbs, but I don't know the condition of them.

Oh... I have a bunch of stators too and headlight lenses.... and 7 Yamaha gaskets for the stator to the engine - NOS along with NOS choke cable, NOS tail light lens, NOS front sproket cover (200K), NOS throttle screw kits (2), NOS recoil 'prongs', 2 NOS gaskets for recoil to stator, etc.

Bruce

[4x4chevette]

Well my lil bro just cracked the stator cover (tween engine and recoil) Got one of those... need a gasket too. I just need a carb with a choke, our chokes is gone, hard startin ti cold..

lemme know. Brake stuff can wait...

[350x'inNY]

Will have to check if the 200E and 225 stator cases are the same as the chain drive 200's. Is that's all that's wrong with your carb? You can by the choke seperate from the entire carb. I will check if I have an extra choke cable. The NOS one is going on my 'Yamahauler' Project bikes.

Bruce