Results 1 to 11 of 11

Thread: 1984 atc 200x motor

  1. #1
    Join Date
    Nov 2003
    Location
    Washington State
    --
    90

    1984 atc 200x motor

    Hello,

    I have a question about a 1984 atc 200x. What is the newest motor, of the same size that would bolt right into the frame?
    Thanks for all the help.

    atc 777
    john

  2. #2
    Join Date
    Apr 2003
    Location
    Bay Area CA.
    --
    2,638
    the 1985 is the same
    1985 350x
    1985 atc70

    2006 ltz400
    2017 z125pro

  3. #3
    Join Date
    Mar 2004
    Location
    North Central Ohio!!
    --
    2,712
    You know what, I saw some chinese enduro on e-bay with a honda engine in it, and was looking at it. It sure looks damn close. It would be cool if it worked. It kicks the wrong way, but it has elecric start.
    Attached Thumbnails Attached Thumbnails 150dbengine.jpeg  
    2007 YAMAHA YTZ450 went to a great home RIP Sam


  4. #4
    Join Date
    Mar 2003
    Location
    Barnesville,Ohio
    --
    2,298
    the engine in that enduro could be an xr200 maybe? did they have electric start?
    1985 Honda 350X - a lot of performance stuff, everything but a cam, hope to get one soon
    1984 Honda 200ES
    198? Yamaha YT60 Tri-Zinger
    TrikeFest '04 & '07 Survivor

  5. #5
    Join Date
    Mar 2004
    Location
    North Central Ohio!!
    --
    2,712
    Didn't the xr 200 engine come in the 86-87 200x? Besides this engine has a 5-speed trans. I'm sure the xr has a 6 speed.
    2007 YAMAHA YTZ450 went to a great home RIP Sam


  6. #6
    Join Date
    Nov 2003
    Location
    Washington State
    --
    90

    xr200 motor

    Would the XR 200 Motor fit the 84 200x frame, or would I need to modify the frame? Thanks again for all the help.

  7. #7
    Join Date
    Jan 2003
    --
    446
    they are the same motor just 6 gears and you have to change the kickstarter to kick forward.
    1982 250r it will run again, new rings,razors,stator!!!(UGLY)
    1985 200x runs on race fuel or alky ONLY!
    western new york riders check out:
    http://groups.yahoo.com/group/wny3wheelernuts/

  8. #8
    Join Date
    Nov 2003
    Location
    Washington State
    --
    90

    Kickstarter

    How hard is it to change the kick starter to kick forward on these motors?
    Thanks

    John

  9. #9
    Join Date
    Jun 2003
    Location
    Lake George, New York
    --
    1,732
    86-87 200xs had 6 speed transmissions. You could maby even fit a 250cc motor in there. Maby a cr

  10. #10
    Join Date
    Jan 2003
    --
    446
    they are east to change if you have a 200x kickstart assembly
    1982 250r it will run again, new rings,razors,stator!!!(UGLY)
    1985 200x runs on race fuel or alky ONLY!
    western new york riders check out:
    http://groups.yahoo.com/group/wny3wheelernuts/

  11. #11
    leprogle's Avatar
    leprogle is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2003
    Location
    New Brunswick
    --
    345
    a buddy of mine has a 78 xl250, and the motor looks like it might almost bolt into a 200x
    Caution
    Do not "POP WHEELIES" and run for any distance with the ATC. The oil capacity is relatively small and the oil will drain out of the oil pump area thus causing loss of oil pressure, resulting in costly engine damage -CLYMER

//ArrowChat Integreation Code //