Just Too Addicted
Arm chair racerJust too addicted
I want to get a billet double row bearing set up for my 85 350x. But the ones that I see are for the 1986? Has anyone put a new carrier on thier 85? If so what brand did you use. Any setup or mods need to be done?
Who makes the best for the 85?
Thanks in advance.
RR
'WHEN IN DOUBT.........GAS IT!'
87 KXT250B2 Tecate
86 ATC250ES BIG RED
85 ATC350X
85 ATC70
'A FEW IN PARTS'
Got The Holeshot
Arm chair racerJust too addicted
My understanding is that the only aftermarket 350X carriers are the 86 style. I believe you have to use a 86 rear sprocket and sprocket bolts.
ATCnut
82 185s - sold
83 200x (hopped up)
84 200x (stock)
84 70 (lost this one to the DMV)
85 70 (soon to have lights, a foot brake, and CDI ignition)
84 200es (parts trike) - sold
85 350X (the best)
85 350X (siezed motor, dream of a poweroll kit someday)
85 250sx (frame was trash, got parted out)
86 250sx (the tractor)
86 250sx (a nicer tractor)
86 250sx (an even nicer tractor)
87 200x (parts trike, its really rough, a dog was chewing on it for a while)
87 250es Big Red (the tank!!)
Big bores are cool
Arm chair racerJust too addicted
Rad,magnum,lonestar and i think one or two more(can't remember) makes aftermarket carriers for the 350x.You can get double row or tapered.You do have to make adjustments on the rad and the magnum to make them fit.I believe the lonestar only makes one for the 86?(someone correct me if i'm wrong)On the rad(double row)you have to put washers or a thick snap ring in between the sprocket hub and the carrier so there is no rubbing,the tapered one is a different story i heard.With the magnum,a spacing problem too i heard but can't help you out there.
85/86 ATC 567x
Bailey(11/30/97-4/17/06) My little angel
Reply With Quote