First Time Rider
Arm chair racerNew to the board
hi i have a honda 200 and i wana know a couple of things
1.my rear axle is a little wobble i heard thati need to replace my barings is this true.
2. my rear drum wont come offi have tryed every thing is thear a trick or do i have to take the axle off.
3. help
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
First Time Rider
Arm chair racerNew to the board
did you take off those 2 nuts (main nut and lock nut) that are next to the drum
"And I bled out of here, and here, and here and here.........."
'84 200M-Cobra pipe-sold
'99 honda 300 fourtrax-2 inch lift, Bearclaws on ITPs
1981 honda 185s-Ole Smokey! :
1987 Honda 250x....well in theory
First Time Rider
Arm chair racerNew to the board
yes i have taken them off
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
First Time Rider
Arm chair racerNew to the board
It should come right off then.....im guessing that you already took off the 6 screws around the outside. on my '84 M you take the 6 little bolts off the 2 large ones and it comes right off. mabie there is still an old gasket around the inside stuck on it or mabie there is silicone or mabie someone even welded it on
"And I bled out of here, and here, and here and here.........."
'84 200M-Cobra pipe-sold
'99 honda 300 fourtrax-2 inch lift, Bearclaws on ITPs
1981 honda 185s-Ole Smokey! :
1987 Honda 250x....well in theory
First Time Rider
Arm chair racerNew to the board
on and on the bearings if your adjustment bolts are tight then its probaly your bearings
"And I bled out of here, and here, and here and here.........."
'84 200M-Cobra pipe-sold
'99 honda 300 fourtrax-2 inch lift, Bearclaws on ITPs
1981 honda 185s-Ole Smokey! :
1987 Honda 250x....well in theory
Power User
Roostin Away
i gotta ? for my 185s....the back wheels are wobbly...and when i tighten the bolts up it still does it...its only 1 wheel tho..could it be the bearings as well?
trikes owned:
85' 200m - sold
84' 200x - sold
83' 185s - sold
82' 185s - sold
85' 350x !!! - selling
First Time Rider
Arm chair racerNew to the board
i have the same problme but it is both wheels
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
Power User
Roostin Away
do your wheels wobble or rattle around. if its sitting still and you grab the tire and try to shake it does it move. if not your wheels could be bent
Hoarder of the finest junk
'82 YT175
'83 YTM200
'85 KLT110
'86 Moto 4 225
'84 TRX200 trike conversion.
'87 Tecate 4
Lots of vintage and not so vintage two wheeled stuff.
New to the board
Arm chair racerNew to the board
My cousin has the same problem with is 200s. If you grab the back of the trike by the grab bar, you can wiggle it back and forth, while keeping the wheels still. There is a ton of play. My guess is that it is the bearings which we just bought and will be changing shortly.
1984 Honda 200S
First Time Rider
Arm chair racerNew to the board
no it has a lot of paly
three wheeling for life
rides:
83 honda atc 200 Sold for $400
saving up for tecate 250R tri Z ao 350X
First Time Rider
Arm chair racerNew to the board
mine did the same thing. i replaced the bearings but it still does it.
Reply With Quote
