Hey motoman, where can I get those parts to build my motor up like yours? Are the still availible? I want to build a racer like yours. Thanx
Got The Holeshot
Arm chair racerJust too addicted
Hey motoman, where can I get those parts to build my motor up like yours? Are the still availible? I want to build a racer like yours. Thanx
"I am going out of this world.....the same way I came in...screaming and covered in blood."
Got The Holeshot
Arm chair racerJust too addicted
I am looking at a supertrapp pipe from powroll. But it is for the trx 90. It looks like it would fit. Will it?
"I am going out of this world.....the same way I came in...screaming and covered in blood."
Check my feedback before dealing with me
Roostin Away
the trx doenst fit i tried but you have to bend it pretty bad and not worth it in the end. I found my on ebay I would just want to sell her. I would part her out and you can buy the parts off this one. I can tear her down and ship in box form me and wont be that much.
Theres not alot if any of the motor parts avaible anymore i got mine fomr a guy in texas i knew that worked at troy ohio honda deal that i grew up racing with but he lives in texas now and sold all his old parts.
85 Atc 70
86 Atc 125m
85 atc 350x
86 atc 250r
86 Atc 250r TT build
85 Big Red bought brand NEW
2012 Honda Goldwing Gl1800
Check my feedback before dealing with me
Roostin Away
i would sell the famre and keep the motor and pipe and on a later date build a full suspension tirke maybe a winter project. then i would sit it in my basement.
85 Atc 70
86 Atc 125m
85 atc 350x
86 atc 250r
86 Atc 250r TT build
85 Big Red bought brand NEW
2012 Honda Goldwing Gl1800
Got The Holeshot
Arm chair racerJust too addicted
OK, thanks for the help. I could probably put a 125m piston in it instead of a big bore kit. My old school 110 project has begun! The headlight and tailight has been removed...more to come.
"I am going out of this world.....the same way I came in...screaming and covered in blood."
Got The Holeshot
Arm chair racerJust too addicted
I have found all of my 1980 front end, and I ground the headlight brackets off to make more fot a number plate. More to come...
Does anyone remember the mystery swingarm I had sandblasted? Well, I was curious, and I found out it fit my 110 carrier. It was from an old ATC 90 racer with suspension. It also had a heavy duty axle and aluminum 40tooth sprocket on it. All of these parts fit my 110. I am going to e-mail the guy I got it from to see if he has the frame and front forks.
"I am going out of this world.....the same way I came in...screaming and covered in blood."
Power User
Roostin Away
wheres the guy with the full suspended race frame in his 110?
Hoarder of the finest junk
'82 YT175
'83 YTM200
'85 KLT110
'86 Moto 4 225
'84 TRX200 trike conversion.
'87 Tecate 4
Lots of vintage and not so vintage two wheeled stuff.
Check my feedback before dealing with me
Roostin Away
Man i would sell my frame to you cause i need the money now for another project. Or any of my 110 parts.
85 Atc 70
86 Atc 125m
85 atc 350x
86 atc 250r
86 Atc 250r TT build
85 Big Red bought brand NEW
2012 Honda Goldwing Gl1800
Formerly hond_atc
Arm chair racerJust too addicted
that guys 110 with a suspended frame is in the restore section of the main site
Got The Holeshot
Arm chair racerJust too addicted
TrikeKid-The guy lives down here in Texas. I found out that I can use a ct70 dirtbike frame, and mount up my swingarm.
Motoman-I will buy that frame from you if my zinger top end sells. I too, need money for my project. Somebody please buy my top-end!
hond_atc- that is not the guy I am talking about. I actually don't know if the guy I bought my 110 from still has the frame or not. I will either buy the Bandito 2+ frame from motoman, or get a ct 70 frame for some suspension.
"I am going out of this world.....the same way I came in...screaming and covered in blood."
Got The Holeshot
Arm chair racerJust too addicted
I have a post in the classifieds if anyone needs parts. I need the money for my racing 110 project this winter.
"I am going out of this world.....the same way I came in...screaming and covered in blood."
First Time Rider
Arm chair racerNew to the board
Did anybody get it finished?
Reply With Quote