Results 1 to 3 of 3

Thread: good way to clean aluminium?

  1. 07-01-2004, 08:28 PM #1
    trailboss
    trailboss is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Jan 2004
    --
    80

    good way to clean aluminium?

    what's a good way to clean aluminium parts?
    85 250sx
    91 polaris trailboss 4x4(sold,what a mistake)
    85 125m


    i want a tiger 500 sooooo bad.........
    Reply With Quote Reply With Quote
  2. 07-01-2004, 09:09 PM #2
    hondatrikesrule22's Avatar
    hondatrikesrule22
    hondatrikesrule22 is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Nov 2003
    Location
    Houston,Texas
    --
    1,044
    Paint stripper...or steel wool and some polish.
    "I am going out of this world.....the same way I came in...screaming and covered in blood."
    Reply With Quote Reply With Quote
  3. 07-01-2004, 09:20 PM #3
    3WheelsForever's Avatar
    3WheelsForever
    3WheelsForever is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Dec 2002
    --
    749
    I just cleaned and polished one of my sidecases on my T3. Im planning on doing it to the whole engine. I know the Napa Paint Stripper I used worked real well to get off the paint and after that I used a medium grit wire wheel that cleaned up the bigger scratches. Then I used some steel wool and some Mothers aluminum polish.
    3WheelsForever / Virgil
    TrikeFest 03, 04, 05, 06, 07

    1985 Honda ATC350X - TF2015 Project
    YZ426 Hybrid Trike - On the back burner
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //